Cybertool bit questions

[Planterz]

I'm considering a V-Nox Cybertool.

Firstly, what's a Pozi Drive bit?

Secondly, do they offer a bit kit or sell bits seperately? Or, do other brands of bits fit in the driver (like Wiha)? It'd be great if I could choose the bits I wanted.

 

[enkidu]

Wiha microbits do fit in the Cybertool bit holder but the V'nox bits come with a small bearing in the bit itself while the Wiha bit is straight so you may need to take extra care so the bit doesn't fall out.

Pozidrive is a cross shaped driver often mistaken for a philips drive. Pozi-drive screws have a X-mark in addition to the cross shaped hole. This page explains the difference http://www.hafeleonline.com/usa/support/faq.html#BB

The Cybertool set (29,34 and 41) have a great combination of tools. I'm sure you'll be happy with it.

 

[Planterz]

Thanks.

The message you have entered is too short. Please lengthen your message to at least 10 characters.

 

[Planterz]

Actually, one more question. Are the bits (or driver) magnetized?

Actually, yet one more question. How many layers are the 34 and 41 models?

 

[enkidu]

Actually, one more question. Are the bits (or driver) magnetized?

Nope.

Actually, yet one more question. How many layers are the 34 and 41 models?

I don't have a 41 model, but I know it adds a wood saw and a metal saw in addition to the tools on the 34:

• Cybertool 29 - 6 front side tools, Large blade, small blade (1 backspring), Bit driver, bit holder (2 bs), can opener, bottle opener (1 bs); 2 back side tools corkscrew and awl - 4 back springs
• Cybertool 34 - Adds pliers (1 thick bs) and scissors (1 bs) on the front and a hook on the back - 6 back springs
• Cybertool 41 - Adds wood saw and metal saw (2 bs?) on the front and two tools (maybe chisel and small screwdriver?) on the back - estimate 8 back springs

 

[Planterz]

Again, thanks.

 

[klattman]

Nope.I don't have a 41 model, but I know it adds a wood saw and a metal saw in addition to the tools on the 34:

• Cybertool 29 - 6 front side tools, Large blade, small blade (1 backspring), Bit driver, bit holder (2 bs), can opener, bottle opener (1 bs); 2 back side tools corkscrew and awl - 4 back springs
• Cybertool 34 - Adds pliers (1 thick bs) and scissors (1 bs) on the front and a hook on the back - 6 back springs
• Cybertool 41 - Adds wood saw and metal saw (2 bs?) on the front and two tools (maybe chisel and small screwdriver?) on the back - estimate 8 back springs

My 41 model has 8 layers, but the one for the little pliers is a tad wider, so I would call it 8 1/3 layers. Also the wrench takes up 2 full layers.

The dimensions (closed) are:
Length: 3 9/16"
Height: 1"
Width: 1 5/16"

The width is from the total thickness of the layers plus the scales.