- Joined
- Feb 27, 2003
- Messages
- 2,369
I missed this one the first time around, but managed to snag it in the after market.
Tim's work is very hard to come by, but it is simply outstanding.
Here is his description of the knife.
Blade:
O1/L6 Damascus, 160 Layers, Random Pattern
7.65" Long, 1.66" Wide, 0.245" Thick at Guard
60.5 HRC, Salt Bath Martempered, Triple Tempered
All Damascus tang and cap threading. Nothing is welded on for the tang.
Handle:
Flamed Walnut, Oil Finish
5.05" Long, 1.34" Wide at Guard, 0.719" Thick at Guard, 1.62" Wide at Butt, 0.931" Thick at Butt
Balance Point: At front copper spacer. A light "fast" blade feel.
120+ year old wrought iron fittings. They are etched to show the grain and slag inclusions.
Oval section in front, tapering to a teardrop shape at the butt.
Tim's work is very hard to come by, but it is simply outstanding.
Here is his description of the knife.
Blade:
O1/L6 Damascus, 160 Layers, Random Pattern
7.65" Long, 1.66" Wide, 0.245" Thick at Guard
60.5 HRC, Salt Bath Martempered, Triple Tempered
All Damascus tang and cap threading. Nothing is welded on for the tang.
Handle:
Flamed Walnut, Oil Finish
5.05" Long, 1.34" Wide at Guard, 0.719" Thick at Guard, 1.62" Wide at Butt, 0.931" Thick at Butt
Balance Point: At front copper spacer. A light "fast" blade feel.
120+ year old wrought iron fittings. They are etched to show the grain and slag inclusions.
Oval section in front, tapering to a teardrop shape at the butt.

