Gary W. Graley
“Imagination is more important than knowledge"
Knifemaker / Craftsman / Service Provider
- Joined
- Mar 2, 1999
- Messages
- 27,440
Blank is now gone...
Just figured I'd post here as it is more of a sale for knife makers, a cast 440C Dendritic blade blank from David Boye, wharncliffish type blade, he calls it the Persona, I have this blank but will probably never finish it up as I don't have the equipment to work knives, nor the time for that but someone might want to give it a try?
My sale post on the forsale section is here;
http://www.bladeforums.com/forums/showthread.php?s=&threadid=177259
and below is a scan of what the blank looks like, blade is about 2 7/8" long, bolster is integral and as you can see it's designed for being placed into a hidden tang style of knife.
This needs to be Heat treated, normally just like 440C would be, then ground down and finished up, the edge is along the lower part of the blade show here. So check out the forsale post if you are interested and give me an email...
Just figured I'd post here as it is more of a sale for knife makers, a cast 440C Dendritic blade blank from David Boye, wharncliffish type blade, he calls it the Persona, I have this blank but will probably never finish it up as I don't have the equipment to work knives, nor the time for that but someone might want to give it a try?
My sale post on the forsale section is here;
http://www.bladeforums.com/forums/showthread.php?s=&threadid=177259
and below is a scan of what the blank looks like, blade is about 2 7/8" long, bolster is integral and as you can see it's designed for being placed into a hidden tang style of knife.
This needs to be Heat treated, normally just like 440C would be, then ground down and finished up, the edge is along the lower part of the blade show here. So check out the forsale post if you are interested and give me an email...