Difference between classic and Regular

giant1

giant1

Joined
May 9, 2007
Messages
2,955
Just wondering if the classic profile with a larger thumb cut out for the lock release is easier to you on a day to day basis compared to the regular which does not seem to have as much of a cut away. (Hope my question makes sense :o )

I would appreciate any comments from those that use both classic and regular: Is one easier over the other in daily use?

Also, what do you guys think about the wood inlays for EDC ? Do they last OK?
 
I have small Sebbies in both versions. The classic is a little quicker for me to position my thumb to unlock the blade, but the regular has a better fit and feel in my hand, so I EDC a small regular Sebbie. There's no difference to me in how easily the lock operates once my thumb is in the right place.

The small classic handle shape is just a little thin top-to-bottom for my taste. The shape of the regular, even though it's only slightly different, seems to give me a grip with better control over the knife.

My EDC is plain Ti... I like that best. My large classic Sebbie is a blue dog paw model, so there are no inlays on it, just the graphics cut into the handle slabs. In the large size, a classic handle works fine for me. It's just the small one where I seem to have a preference for regular over classic.

I don't have any trouble with the flat handles on the Sebbies. CR's Ti has a nice feel to it... not cold and slick like SS. I don't know if I'd even like one with inlays on it for actual use.

HTH...
 
I have small and large regulars, i dont have any classics but i have played with a few. When it comes down to it though i believe they will be fairly similar if not the same in everyday use, its more a styling thing i think ? i prefer the look of the regulars so i went for them.
 
I tried a few out at a store and opted for the Classic. It fit my hand better and just felt right, to me. You may have a different experience. Can't really go wrong. Same amazing lock up, same quality. I thought I'd be happy with a Large after I ordered mine, but no, I want a small, TOO. I figure after I get a small, I'll be ready for Regulars...
 
I have a large regular that I got last year and wish I had gotten a classic. I have difficulty getting the knife to open consistently. Maybe it's my fat thumb or maybe it's because I have to tighten the screws so tight to keep the balde from wobbling. I don't have this trouble with any other folders and I have many. I think the classic would allow me to get a better angle on the thumb stud. Any advice? I would like to like this knife more than I do. The fit and finish is excellent and I love the design but it isn't working for me. Don't beat me up too bad, thanks.
 
Not that this will help in anyway, but I'll be getting a small classic soon. I haven't held any of them but I just think the classic looks much better. More sleek and timeless. Now the only problem is which configuration to get. The wood inlays with gold thumblug of course looks nice and dressy, but maybe you'll grow tired of it after a while. Some of the CGG's look nice too. Damn Chris for making so many styles!
 
I currently have a small classic wood inlay, which I got in a trade for a small CGG reg.

Here's what I noticed, although I admit I've never tried a smooth classic.

The reg. has grooves in the handle & matching section of the lock bar. The frame is curved ever so slightly compared to the classic. It reminded me very much of the Alias II (Another knife I had). I have large thumbs & I didn't really have a problem opening the reg., but the classic is a little easier to do so (It is a larger cut-out).

Having said all that, I still prefer the classic. It has a deeper finger guard, which will/can keep you finger from going forward (Although the reg. has the grooves in it to do that). Also, the wood inlay gives the knife some width & I believe that helps, too.

I didn't notice the classic being narrower (From top to bottom). Another reason why I liked the inlay is it's stabilized wood (Micarta would be preferred, but they seem to be harder to get), so I believe it won't show wear as easily as the plain or a graphic finish.

HTH
 
I'm interested to hear from anyone that has a wood inlay sebbie in EDC. How does the wood hold up? Is a good daily user?

Thanks for the responses so far.

I should add that I currently EDC a Spyderco Millie a fair bit and love it's size and feel. How will the sebbie compare? Anyone use both?
 
giant1 said:
I'm interested to hear from anyone that has a wood inlay sebbie in EDC. How does the wood hold up? Is a good daily user?

Thanks for the responses so far.

I should add that I currently EDC a Spyderco Millie a fair bit and love it's size and feel. How will the sebbie compare? Anyone use both?
Click to expand...

I currently EDC a small wood inlay classic Seb. The wood holds up fine (As I wrote earlier, it's stabilized wood, meaning it's impregnated with an acrylic resin). It'll hold up fine.

Now, as far as comparing it to the Spyderco Military, I think you might be talking about a large Seb. In which case, I've never had one, but it is still smaller than the Mili (Which I've had briefly-too big for my tastes in pocket carry). Personally, I think a wood inlay Seb. is the best compromise for a user Seb. Micarta might be the best choice, but seems to be harder to get & it could be argued (By me, but only MHO), that inlay wood is better looking than black micarta.

Good luck with your choice.
 
I have carried a Large ironwood Classic everyday for three years. Matter of fact, I used it yesterday to open a can of chicken noodle soup. I removed the clip and carry it in the pouch in my pocket. It still looks great and the scratches on the blade give it a nice well-used look.

Also, the wood inlays help prevent normal day-to-day scratches on the Ti, that you sometimes get from laying it on rough surfaces.

By far the best knife I have ever EDC'd. It has almost become like a security blanket. Even when I go hunting/camping and have several other knives, I don't feel right unless she is in my pocket.
 
First off - I understand that if the CR knives were more widely distributed they couldn't control the retail prices of their products. Even with that - I sure do wish they had more dealers/in more places.. Probably the most frequent quote on these knives in this forum is "Ya gotta handle one to appreciate it". This is essentially true. I traded a wood inlay small classic for a small regular 3line graphic. To my surprise the relativly small amount of engraving on the 3 line makes it a lot easier for ME to grab it and pull out of my watch pocket.. I found the wood inlay slipery in comparison. Truely this is not a right or wrong situation - both tools are well thought out and intelligently put together. But I will bet that if you can handle both - you will prefer one or the other design. Frankly - I'd look for whichever appeals to you on this forum's trade/sell sites - asuming you are looking for a user - they do show up every couple of weeks or so here.
 
You must log in or register to reply here.
Back
Top