- Joined
- Mar 19, 2007
- Messages
- 7,440
All sheaths below are made using American Tanned leather from the back of the animal. The leather I use has almost always been drum dyed at the factory with good penetration and proper finishing. The only time I deviate from this is when I am making custom colors - then I dye and seal my own leather myself before cutting. I use imported braided flat poly thread in 1mm thickness and hand stitch my sheaths in an English Saddle Stitch style. Hand stitching makes a VERY strong stitch and with the awl piercing the leather at an angle makes for a row of stitches that does not tear. I use all brass Chicago Screws to make sure my accessories are secure and a removable dangler that has become my trademark. I finish all of my leather with a combination of pine pitch, beeswax, and oils that conditions, seals, and protects the leather from the elements.
Price includes paypal & shipping costs (CONUS).
First Ill take it gets it. You must note the sheath by it's relative number (1,2,3)
Youre welcome to PM or email me [diomdesindustries@gmail.com]. Time stamps will apply.
I will ship internationally at additional expense: International Priority Mail is $30.00 (no first class shipping option offered)
#1 and #2 are made to fit the Hiking Buddy, Bushboot, EDC-II, or Bushraptor, Patch Knife or nearly any other 3 to 3.25inch blade that Andy makes.
#1:
8-10 ounce. Custom dyed Dark Brown - Tri Basket weave - with tan stitching
115 shipped or 125 with Dangler. (Knife shown is not included)
#2:
8-10 ounce. Russet with custom dyed black border - Tri Basket Weave - Orange Stitching (is perfect with Andy's orange liners).
Lefty shown here for the the dangler example:
115 shipped or 135 with Dangler and custom initials.
#3, #4, #5
#3 is made to fit the Bushcrafter, Arete, Bushfinger, Terrasaur, Recluse, ASP style Pouch Sheath. (Nearly anything that has up to a 4 inch blade that Andy makes). Custom Brown - 8-10 ounce - Custom Stitching
105 with dangler.
#4 is made to fit the Hiking Buddy, Bushboot, EDC-II, or Bushraptor, Patch Knife or nearly any other 3 to 3.25inch blade that Andy makes.
Custom Brown - 8-10 ounce - Tan Stitching. 105 shipped with dangler.
#5 is made to fit the Hiking Buddy, Bushboot, EDC-II, or Bushraptor, Patch Knife or nearly any other 3 to 3.25inch blade that Andy makes.
Custom Brown - 8-10 ounce - Black Stitching - The range marks on this sheath makes it very distinctive. 105 shipped with dangler
Bottle Openers:
Left with stainless lanyard hole (SOLD) and right with custom dye. Both hand made by myself.
30 dollars shipped each
1/4 x 4 inch firesteel Custom Handles:
A - White tail Tip - Brass Lanyard tube. 25 Shipped
B - White Tail with Water Buffalo - Stainless tube. 28 shipped
C - Black Micarta with Red Liners - 28 shipped
D and E - White Tail Dyed - 25 shipped
F Ghost Jade Micarta - 23 shipped
3/8th firesteels
Walnut Stainless - 28 shipped (SOLD)
Black Micarta with Red liners - 25 shipped
White tail and buffalo spacers and end cap with brass tube - Magnesium bar and Firesteel package!
30 shipped
Thanks for looking and let me know if you see anything you like.
Jason
Price includes paypal & shipping costs (CONUS).
First Ill take it gets it. You must note the sheath by it's relative number (1,2,3)
Youre welcome to PM or email me [diomdesindustries@gmail.com]. Time stamps will apply.
I will ship internationally at additional expense: International Priority Mail is $30.00 (no first class shipping option offered)
#1 and #2 are made to fit the Hiking Buddy, Bushboot, EDC-II, or Bushraptor, Patch Knife or nearly any other 3 to 3.25inch blade that Andy makes.
#1:
8-10 ounce. Custom dyed Dark Brown - Tri Basket weave - with tan stitching
115 shipped or 125 with Dangler. (Knife shown is not included)
#2:
8-10 ounce. Russet with custom dyed black border - Tri Basket Weave - Orange Stitching (is perfect with Andy's orange liners).
Lefty shown here for the the dangler example:
115 shipped or 135 with Dangler and custom initials.
#3, #4, #5
#3 is made to fit the Bushcrafter, Arete, Bushfinger, Terrasaur, Recluse, ASP style Pouch Sheath. (Nearly anything that has up to a 4 inch blade that Andy makes). Custom Brown - 8-10 ounce - Custom Stitching
105 with dangler.
#4 is made to fit the Hiking Buddy, Bushboot, EDC-II, or Bushraptor, Patch Knife or nearly any other 3 to 3.25inch blade that Andy makes.
Custom Brown - 8-10 ounce - Tan Stitching. 105 shipped with dangler.
#5 is made to fit the Hiking Buddy, Bushboot, EDC-II, or Bushraptor, Patch Knife or nearly any other 3 to 3.25inch blade that Andy makes.
Custom Brown - 8-10 ounce - Black Stitching - The range marks on this sheath makes it very distinctive. 105 shipped with dangler
Bottle Openers:
Left with stainless lanyard hole (SOLD) and right with custom dye. Both hand made by myself.
30 dollars shipped each
1/4 x 4 inch firesteel Custom Handles:
A - White tail Tip - Brass Lanyard tube. 25 Shipped
B - White Tail with Water Buffalo - Stainless tube. 28 shipped
C - Black Micarta with Red Liners - 28 shipped
D and E - White Tail Dyed - 25 shipped
F Ghost Jade Micarta - 23 shipped
3/8th firesteels
Walnut Stainless - 28 shipped (SOLD)
Black Micarta with Red liners - 25 shipped
White tail and buffalo spacers and end cap with brass tube - Magnesium bar and Firesteel package!
30 shipped
Thanks for looking and let me know if you see anything you like.
Jason
Last edited:
