Does anyone know....

R

Rautavaara

Joined
Feb 14, 2004
Messages
7
Does anyone know what are Torx sizes on Cold Steels Ti-Lite ?
I already bought sizes 6 and 10 that I thought were right sizes,
but those doesn´t seem to fit right.
 
Not to say you don't know what you are talking about but are you certain that the screws are Torx head and not Allen Key or some other funky type of head.
 
Kits containing all common sizes (T6-T10) are relatively cheap and available directly from Benchmade and others. Rather than guessing, maybe you should just get a set in kit form. I bought a set of 'jewelers screwdriver' type from SnapOn at a ridiculously inflated price but other options are available for about $10-$15 (US). As indicated above, you may want to get your magnifier out and confirm that these are indeed torx screws. They could be a simple allen or hex head instead. Any good tool supplier should have kits of either type in the size(s) you need. Good luck!
 
To be more specific I´m wondering if there is different size
standard for torx in Europe and US. Those torx head screwdrivers
that I bought were made by Balzer and I think those are good
quality tools, very close to right size, but don´t have that
precise fit. :confused:
 
You must log in or register to reply here.
Back
Top