Easiest way to add Dangle to my Belt Sheath?

M

MeanStreaker

Joined
Jan 13, 2006
Messages
112
Hi everyone, I'm new to having a knife on my belt since I've always just carried pocket folders... and I want to know the easiest way for me to add a dangle option to my Spyderco Bushcraft sheath so it rides a little lower. I went and looked at carabiners, and to get one with the right size opening for the sheath's belt loop would add a whole lot of weight.

Is there an inexpensive solution for sale, or a DIY tutorial you can point this newbie to? I actually like the Spyderco sheath and don't want the expense of replacing it (at least not yet).

Thanks!
 
Last edited:
A strap is easy. Look at this thread, just skip to the parts regarding the dangler.

http://www.bladeforums.com/forums/showthread.php?t=1139038

when the loop is already stitched you need to use removable hardware. I have a nasty habit of forgetting to throw a D ring on before I stitch so I've switched to the hardware mentioned in the thread. They cost a few times what a D does but they are worth it to me both out of convenience and for the customer. Also, if you're only buying one or two it's no biggie.
 
Not sure .I make them a lot but don't really sell them alone. Might be able to just toss one your way though. Take me about 5 minutes to make .


Do you have a pic of the sheath? If the loop is 1" you can make it work with the hardware I mentioned. If the loop is wider than 1" you might get away with trimming the loop to fit the hardware. Other than that the sheath would probably need to be torn down entirely in order to fit appropriate sized hardware.
 
Here's a pic that I grabbed. Sorry, I don't have it in front of me at the moment and can't measure. It's black leather.

I don't want any charity and would happily paypal you a couple bucks for your 5 minutes of work if you feel like throwing me one. :)

spydercoBushcraftSheath_zps774212e0.jpg
 
MeanStreaker said:
Here's a pic that I grabbed. Sorry, I don't have it in front of me at the moment and can't measure. It's black leather.

I don't want any charity and would happily paypal you a couple bucks for your 5 minutes of work if you feel like throwing me one. :)

spydercoBushcraftSheath_zps774212e0.jpg
Click to expand...
That looks like a great candidate for a dangler. A bright Chicago screw would match the rivets nicely. Measure it so I can match it and provide some advice if necessary, then shoot me an email. Let's get you hooked up.
Icewind said:
Beautiful work on your website Omega Leather Works :thumbup:
Click to expand...
Thanks! :)
 
Just Sent an email through your website's Contact Me form. Thanks again.

And I'll second that you do beautiful work! I enjoyed looking through your website and am going to start saving some coin for an upgraded sheath!
 
this is an easy way to mount a beltloop
here are some pics.
the lay out is for a belt but the principle is the same.
vmjC8lU.jpg

Umoa2Eu.jpg
 
You must log in or register to reply here.
Back
Top