Easy fix for getting stripped screws out of my PM2

[Warrior9]

FYI
These work Great at getting those stripped Torx screws ( T6, 8, and 10 ) out of my PM2.
I also have new Wiha Torx bits on the way.

 

[Danke42]

The easiest fix is to send it to Spyderco. Or you can try various rakes, shovels, & tools of destruction and after that send it to Spyderco.

 

[Warrior9]

The easiest fix is to send it to Spyderco. Or you can try various rakes, shovels, & tools of destruction and after that send it to Spyderco.

I tried all those DIY suggestions. I’ve got other screw and bolt extractors but they are too big.
I decided not to send it in and got these micro extractors instead. Spyderco was nice enough to send me some replacement screws which I should be getting soon. My fallback plan was to use C4

 

[Danke42]

Well if you have new screws then just spot weld cheater bars onto the stripped screws. Twist them out. Some people swear by a torx bit super glued in but that's not as positive as I like.

 

[DA170]

FYI
These work Great at getting those stripped Torx screws ( T6, 8, and 10 ) out of my PM2.
I also have new Wiha Torx bits on the way.

Nice work!

 

[Warrior9]

Nice work!

Thanks