JK Knives
Moderator
- Joined
- Mar 6, 2001
- Messages
- 28,091
Like any JK Handmade O1 steel knife, the Element O1 will stand up to any use or crazy abuse. The EO1 is a no frills all purpose knife made with the craftsmanship that is the trademark of all JK Handmade Knives. It is designed small to carry easily, and like fire and water, this is an Element to carry.
Check out this link to see the JK O1 being tested to the extreme.
http://www.bladeforums.com/forums/s...ves-Torture-Test-Passaround!?highlight=Viktim
Food....check
Water....check
Shelter....check
Element O1 knife.....check
YES....a great knife is that important !
and the Element O1 is that great knife that won't break the bank
The Element O1 is ground from a bar of O1 high carbon tool steel, in my shop in Mokena, IL , This steel is found on many of the finest
custom knives and only very rarely on any " factory built knife. I use no water jets, I use no preformed blanks, these knives are made entirely in my
shop from bars of steel sourced from the US .
O1 Steel is tough, sharpens easily and holds an edge better than nearly all production knife steels in this price range.
I heat treat these blades in my own shop to a Rockwell hardness of 58-59, which my many many knife customers over the years tell me is just
right for edge retention and sharpen-ability.
The blade design on either Element 01 knife is a classic drop point 3" long and 1" tall, 1/8" inch thick with a wicked sharp saber grind. . This grind makes for a very strong knife with a rigid spine and is a wonderful all purpose grind that has an easy to maintain edge.
Black micarta handles are standard on the Element O1 and provide a durable and comfortable grip. One solid and one hollow aluminum handle pin locks the micarta handle in place and provides for a lanyard attachment
The Element Series comes standard with a riveted and molded Kydex sheath of my own making.
To keep your cost low, the Element O1 comes in only two sizes:
The easy to carry, never leave home without it, EDC Element O1 (Every Day Carry) with 3" all purpose drop point blade and 3-1/2" handle
or
Hunter Model Element O1 with the longer, hand filling 4" handle and the same great drop point blade design that is
loved by hikers, hunters and anyone who plays and works in the great outdoors.
The Specs:
EO1 EDC - 6 1/2" overall, with a 3" drop point blade, of 1/8" thick O1 steel
EO1 Hunter - 7" overall, with a 3" drop point blade, of 1/8" thick O1 steel
Comparison Photos
Standard kydex sheath.
Optional leather sheath (+$15)
Price Breakdown:
Standard EO1 (EDC or Hunter, black canvas micarta, aluminum pins, kydex pocket sheath) $100
Optional handles $15 - $25
Colored Liners (red or black) - $5
Thumb Notches - $5
Brass pins $3
Leather pouch sheath $15
Shipping $8
.
Check out this link to see the JK O1 being tested to the extreme.
http://www.bladeforums.com/forums/s...ves-Torture-Test-Passaround!?highlight=Viktim
Food....check
Water....check
Shelter....check
Element O1 knife.....check
YES....a great knife is that important !
and the Element O1 is that great knife that won't break the bank
The Element O1 is ground from a bar of O1 high carbon tool steel, in my shop in Mokena, IL , This steel is found on many of the finest
custom knives and only very rarely on any " factory built knife. I use no water jets, I use no preformed blanks, these knives are made entirely in my
shop from bars of steel sourced from the US .
O1 Steel is tough, sharpens easily and holds an edge better than nearly all production knife steels in this price range.
I heat treat these blades in my own shop to a Rockwell hardness of 58-59, which my many many knife customers over the years tell me is just
right for edge retention and sharpen-ability.
The blade design on either Element 01 knife is a classic drop point 3" long and 1" tall, 1/8" inch thick with a wicked sharp saber grind. . This grind makes for a very strong knife with a rigid spine and is a wonderful all purpose grind that has an easy to maintain edge.
Black micarta handles are standard on the Element O1 and provide a durable and comfortable grip. One solid and one hollow aluminum handle pin locks the micarta handle in place and provides for a lanyard attachment
The Element Series comes standard with a riveted and molded Kydex sheath of my own making.
To keep your cost low, the Element O1 comes in only two sizes:
The easy to carry, never leave home without it, EDC Element O1 (Every Day Carry) with 3" all purpose drop point blade and 3-1/2" handle
or
Hunter Model Element O1 with the longer, hand filling 4" handle and the same great drop point blade design that is
loved by hikers, hunters and anyone who plays and works in the great outdoors.
The Specs:
EO1 EDC - 6 1/2" overall, with a 3" drop point blade, of 1/8" thick O1 steel
EO1 Hunter - 7" overall, with a 3" drop point blade, of 1/8" thick O1 steel
Comparison Photos
Standard kydex sheath.
Optional leather sheath (+$15)
Price Breakdown:
Standard EO1 (EDC or Hunter, black canvas micarta, aluminum pins, kydex pocket sheath) $100
Optional handles $15 - $25
Colored Liners (red or black) - $5
Thumb Notches - $5
Brass pins $3
Leather pouch sheath $15
Shipping $8
.
Last edited:
