Emerson CQC-12, 889 SBMF, BM 635, CS Recon 1

Status
Not open for further replies.

batosai117

Gold Member
Joined
Jun 5, 2007
Messages
5,463
Hey everybody, as you all probably know, I've been on the "Great Sebbie" hunt for quite some time now, and I've finally decided to let some of these knives go for a greater cause, getting my first Sebbie!!! No sidetracking this time around and accidentally buying other knives instead, the knives sold here will go straight to my Sebbie fund and I refuse to let myself use it for anything else.

Now on to business.

I have these up for sale:

Emerson CQC-12: Withdrawn - don't have the heart to sell it.
- Satin Finish, Plain Edge, 154CM steel.
- Comes with Box and packaging
- This one was carried for about a week, The lockup is perfect and is about 50-55%, there is a light scuff on the blade, nothing major but thought I would mention this. The handle is in perfect condition. I've only had this knife for maybe 2-3 weeks now, I bought it brand new.

Strider/Buck 889 SBMF: Gone
- Black coated, Plain Edge, 420HC blade steel
- Comes with Clam Pack (opened of course)
- I bought this knife brand new from Academy just this past Thursday, I could simply return it and make more than I am selling it here for. Knife has perfect lock-up, liner sits right at the 55% mark, good strong folder, only carried for a few hours, looks brand new.

Benchmade Mini-Skirmish 635: - SOLD
- Satin Finish, Plain Edge, S30V Blade Steel, Titanium Handles
- Comes with Box and all packaging
- This one is a first production run 0131/1000
- Still just like new, the actual blade was never used, but was touched up once by me just for routine maintenance. There are zero scuffs on the handle and pocket clip. Knife looks great, lockup is great.

- As an added extra for SOLD, there is an interchangeable damascus 1095 carbon steel blade for this. There is one scratch on the damascus blade from use, this blade was the one that was actually used, which kept the original blade from being ruined. This is just the damascus blade itself. It fits the skirmish mentioned above, but does not have it's very own handle.

Cold Steel Recon 1 Spear Point: SOLD
- Black coated, Combo Edge, AUS 8 Blade Steel, Ultra-Lock
- Still just like new, it's still the way it was when I bought it. Great lock-up, zero blade play, very grippy G-10 Handle. There is a small chip in the coating which you can see in the pictures below, I actually bought it like that from a private dealer. I have sharpened the straight edge portion of this knife. Hair popping sharp, one of the best knives for the money that I have seen. I believe I have the box for this one.

As my usual shipping ways, I ship USPS Priority 2-3 day delivery with Confirmation/tracking. I email the tracking number to you as soon as I have it. I will ship the same day that you pay as long as it's not a weekend or already past 4:30pm Central time (for obvious reasons :o).

I prefer Paypal, but Postal Money Orders will be fine as well, just know that I will hold the knife/knives until the MO goes through.

The Buck/Strider 889 will be posted in the Buck For Sale area as well, so time stamp does count for this knife.

Thank you all for looking, and I hope to speak to you guys/gals soon, J.

ps. Email is the best way to reach me, I get them instantly with my phone, so this way you don't have to wait around all day for a response.
 
Last edited:
CQC-12 pics:

1.jpg


2.jpg


3.jpg


4.jpg


Buck/Strider 889 pics:

5.jpg


6.jpg


7.jpg
 
Benchmade 635 Mini-Skirmish and Damascus blade:

10.jpg


11.jpg


12.jpg


13.jpg


14.jpg


15.jpg


16.jpg


Cold Steel Recon 1 Spear Point:

17.jpg


18.jpg


19.jpg
 
Price drop for CQC-12, Buck/Strider 889, and Cold Steel Recon 1. 635 and damascus blade on hold.
 
Emerson CQC-12 is withdrawn, sorry folks, I don't have the heart to sell it.

Buck/Strider will be up for sale until tomorrow, then it will simply be returned to academy for a full refund.

Cold Steel Recon 1 is still for sale.

Thanks for looking, J.
 
I'm interested in the Recon, but in the pics it looks
like the straight edge area is chipped. Can you get me a better
pic? I know you said the coating was chipped but it looks like
it's the actual edge. The price includes shipping, correct?

Thanks
 
I'm interested in the Recon, but in the pics it looks
like the straight edge area is chipped. Can you get me a better
pic? I know you said the coating was chipped but it looks like
it's the actual edge. The price includes shipping, correct?

Thanks

Hey there, I'll put up some more close-ups of it. The blade is not chipped, just that little spot of coating which is in the pics shown.

The prices do include shipping and any paypal fees.

Thanks for looking, J.

ps. Be sure to email me if you are interested, I get emails instantly. I only check in here two or three times a day.
 
recon1pic2.jpg


recon1pic.jpg


Here are the pics of the Recon 1. The blade isn't chipped, just that spot of the coating. Hope this helps clear things up, J.
 
Status
Not open for further replies.
Back
Top