Emerson Knives CQC-14 Snubby - Why is it so expensive for only 2.7" of blade?

N

nimbk

Joined
Dec 23, 2006
Messages
1
Emerson Knives CQC-14 Snubby - Why is it so expensive for only 2.7" of blade? I know it's new but there doesn't seem to be much interest on it?
 
this was designed for those who live in areas where a blade larger that 2.5 (or 2.7) inches is illegal, but they still like the feel of a full size handle.

try not to think of high price = large knife.
 
less blade material should be lower price. I don't see a lot of demand or hype about the cqc14.
 
f117a said:
less blade material should be lower price. I don't see a lot of demand or hype about the cqc14.
Click to expand...

not necessarily. an inch less steel doesnt mean that much in the production process. the blade still has to be cut, fitted, ground, coated, and sharpened.

the scales and liner also have to be cut and fit.

since the only shortened part is the blade, the overall knife is very similar in size to a larger knife when closed.

its not like going from a mini 7 to a 13 bowie in size.

the price is mid range for an eki.
 
Rat Finkenstein said:
Is it the same price as a similar model with a larger blade?
Click to expand...

on the eki site it is listed at 209, a 13 is listed at 229, and a 7 at 159, for comparison. so to answer your question, not quite the same price, but not priced the same as the smaller models.
 
Two new black, serrated CQC-14 had ending bids of only $100 on ebay. Since this is a new item, new items usually will go for higher prices on ebay but the CQC-14 sold for less than dealer price on ebay. This tells you that the CQC-14 is over priced.
 
MORIMOTOM said:
not necessarily. an inch less steel doesnt mean that much in the production process. the blade still has to be cut, fitted, ground, coated, and sharpened.

the scales and liner also have to be cut and fit.

since the only shortened part is the blade, the overall knife is very similar in size to a larger knife when closed.

its not like going from a mini 7 to a 13 bowie in size.

the price is mid range for an eki.
Click to expand...

What Morimotom said. The cost of the raw materials is a very small percentage of the cost of most manufactured products.

For knives, small or big, both have to be designed. Both have to be machined. Both have to be heat treated. Both have to be assembled. Both have to be marketed. Plus there are non-production costs that must be factored in. Lights and heat. Real estate. Front office staff. By the time you look at raw material costs, it's really a wash between 2.5" and 4".
 
The online price go from $129.99 - $175.00. There are a multitude of choices at that price range.
 
Let's not forget that this is simply the price range that he'll expect for his knives. He holds himself to a certain standard and there are willing buyers for his expectations. The manufacturing process can only cost so much, there comes a point where the maker is just naming his price. I have absolutely no knowledge about knife making so I don't know where that line is, but I know there is one. And there's nothing wrong with that at all.
 
There's not a lot of interest in the Snubby HERE, but there is a lot of interest elsewhere. As far as why its so expensive, if you buy from online dealers you can find it for MUCH less than on the EKI site, also don't buy new.

By the by, why do I get the feeling that this isn't really your first post here, and you're really a troll looking to stir the pot?
 
SpyderJon, im asking a legit question. You don't like the responses so you immediately cry troll.
 
f117a said:
SpyderJon, im asking a legit question. You don't like the responses so you immediately cry troll.
Click to expand...

Pardon me, but I wasn't talking to you at all. Feeling defensive?

My point was that the originator of this thread has *1* post- and its a very troll-like post- so unless you are actually nimbk, get the sand out. I don't use that word (troll) lightly- ever.
 
Interesting. The model had escaped my notice.

I like the full-size handle with a law required short blade. Maintains control, etc.

Off to investigate.

Thanks

P.S. After lookin' at it, it appears to be a fair deal at the on-street prices. Like the frame shape and it has the niffty wave feature with a practical blade shape.
 
It's a great knife. At the Chicago show this past september Ernie introduced me to the guy who asked for the original design.
He needed the short blade to keep it legal where he lives but he also needed the full size handle for the size of his hands.
 
This is not the first knife to be offered with a short blade in a full-size handle. The configuration is a convenience in some circumstances, not just a way to skirt knife laws.

The Spyderco DoDo is an awesome working knife for specialized tasks, and the handle is not simply full-sized but ergonomically designed to provide a tremendous amount of support and force through that small blade.

Ragweed Forge sells knives with a similar philosophy, with a puukko blade well under 3" but a large handle.
See the Little Carving Knife, first on the page.
See the Northern Wilderness, fourth down on its page.
 
You guys that seem surprised about the short blade in a larger handle format may as well get used to it. I have the sneeking suspicion that over the next 20 years this will be the norm if not the way folders have to be made due to further restrictions on blade lengths and changes in the law. A lot of makers including myself have incorporated a large handle small blade model in their line up of products they offer in the way of modern one hand opening folders.

As for the price. Something is only worth what someone is willing to pay for it. If you are not interested don't buy it. Ebay is not the place to use as a reference to give or find value for anything. It can give you an idea at times to see what some models are bringing to other sellers but just because two or three guys got a deal there on a knife that was obviously worth more doesn't mean that now all of them should be priced at that less than wholesale price.

The knife was designed by Ernie for Emerson fans to be able to carry their favorite brand when traveling, or entering into more restrictive zones where the blade length of your carry knife can get your other longer EDC confiscated or you arrested for concealed carry of a weapon.

STR
 
Labor content , is the main consideration vis a vis price . I think the snubbies are a great idea . Most "working " blades are large handled , small bladed . allows great precision and control . I strongly agree with STR , get used to it fellas .

Another plus is that short blades wit big choils would tend to minimize the liner lock's failings .

Chris
 
You must log in or register to reply here.
Back
Top