fallkniven A2 angle?

E

EnglishBob

Joined
Oct 28, 2006
Messages
43
Hello guys, this is my first thread. i,ve got an Fallkniven A2 i bought it to use as my main chopper in the bush, when it arrived it was not sharp, in fact it was nothing less than blunt. I knew i had to get off to a good start so i used my Lansky system to set the end, i set it on the top notch on the clamp at 30 degrees bearing in mind i wanted to use it for chopping splitting duties. have i made the right choice?
 
The A2 is probablly convex edged so it has no defined grind angle.have you tried a butchers steel?I sharpen both of my Fallkniven's with a steel and get a scary sharp edge.
I'm interested in the A2.Let me know how it works out for you.
 
i have tried it out on hard wood it was about 3" diameter it went through well with no bind less than 2 minutes easy, and i put it head to head with a rb6 predator out of interest on the same log had to stop, the top screw came out of the predator.
 
You must log in or register to reply here.
Back
Top