- Joined
- Oct 19, 2005
- Messages
- 19,791
As always, my first priority is to thank all of you. Fiddleback Forge depends on y’all, and we hope you love the tool you buy from us.
Alrighty! I’m excited to tell you that the new method is working!!! We are doing several small batches now instead of one big batch. This has made it much more enjoyable for me. Doing a 5 or so minute step on 30 knives is torture and we had maxed out that system, and I had maxed myself out. This runs easier, and more efficiently and is saving my body a lot of pain. We have a BUNCH of knives around this place right now. I hope you all love them!
Even though we are growing, please be sure that every knife that has my initials has been hand ground by me. Also, the handle shapes are mine alone. Honestly, right now I have my hands in every process. But I wanted y’all to know that I’m not marking knives with my name that aren’t made by me.
Thank you all for the support. My family depends on y’all.
The prices this week are without sheaths. I am lucky enough to work with Rick Lowe and Heber Ellsworth for my sheaths. The make beautiful sheaths that really compliment my work. I appreciate your support for them as well.
The steel this week is 3D Spalted 01 steel and CPM 154CM.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
Shipping is included within the US. We do all our shipping on Thursdays.
Scandi – If you are a Scandi guy, I have two beauties for you today!
2013 1011 001 – Arete, Aquamarine g10 (jade over blue g10) over black g10 liners, Skeletonized full thickness tang, Scandi on 1/8” thick 01 steel - $255 SOLD
2013 1011 02 – Bushcrafter, Curly Koa over black canvas with a white g10 pinstripe, Skeletonized full thickness tang, Scandi on 1/8” thick 01 steel - $275 SOLD
The Small Knives – I’m listing the new EDC separately, so I have three knives to show together in this batch. One is a Bow Legged Joe.
2013 1011 03 – Bow Legged Joe, Tuxedo Config, Full thickness tang, Convex on 5/32” thick 01 steel - $155 SOLD
2013 1011 04 – Hiking Buddy, Arizona Desert Ironwood on black with a white g10 pinstripe, Skeletonized full thickness tang, Convex on 3/32” thick 01 steel - $230 SOLD
2013 1011 05 – Bushboot, Bloodood over black g10 with a white g10 pinstripe, Skeletonized full thickness tang, Convex on 1/8” thick 01 steel - $230 SOLD
EDCII – Well, I still love the old EDC, so I’m not cancelling it. But, I wanted to re-vamp the look with the same blade shape, so here is the new EDC. This blue Sycamore is something else too. Neato stuff.
2013 1011 006 – EDCII, Arizona Desert Ironwood over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $270 SOLD
2013 1011 007 – EDCII, Stabilized dyed Sycamore on natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel Convex on 5/32” thick 01 steel - $270 SOLD
One off, This EDC is a one of a kind prototype that came out quite good. It’s the old EDC handle style with a bit of a guard. This is a one of a kind knife and I won’t be making more.
2013 1011 008 – EDC Prototype, Osage over black g10 with a blue g10 pinstripe, Skeletonized full thickness tang, Convex on 5/32” thick 01 steel - $230 SOLD
More Nessmuks!! The recent thread about HI and ole Sarge got my juices flowing for a more traditional Nessmuk. So I broke out the old beat up pattern to get the dimensions, and came up with this knife. You could likely have guessed its measurements, which come in at 4” long blade, and a 4.5” long handle.
2013 1011 009 – Nessmuk, Arizona Desert Ironwood over black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
2013 1011 010 – Nessmuk, Stabilized dyed curly Maple on natural, Tapered tang, Convex on 1/8” thick 01 steel - $295 SOLD
Two Woodchucks – Osage and Wenge. I love holding this design.
2013 1011 011 – Woodchuck, Osage over natural canvas with an orange g10 pinstripe, Skeletonized full thickness tang, Convex on 1/8” thick 01 steel - $280 SOLD
2013 1011 012 – Woodchuck, Wenge over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 1/8” thick 01 steel - $320 SOLD
Kephart – More Wenge. Nice looking knife!
2013 1011 013 – Kephart, Wenge over black g10 with a blue g10 pinstripe, Skeletonized full thickness tang, Convex on 1/8” thick 01 steel - $255 SOLD
Snubnose – Rare one. This one has a GREAT looking full height grind!
2013 1011 014 – Snubnose, Maroon linen over natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
Bushfingers – Man, I want to keep one of these Black Palm ones!
2013 1011 015 – Bushfinger – Arizona Desert Ironwood over black g10 with a blue g10 instripe, Tapered Tang, Convex on 1/8” thick 01 steel - $295 SOLD
2013 1011 016 – Bushfinger, Stabilized Dyed (blue) Black Palm over natural canvas with an orange g10 pinstripe, Tapered Tang, Convex on 1/8” thick 01 steel - $295 SOLD
2013 1011 017 – Bushfinger, Stabilized Dyed (blue) Black Palm over natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
Sneaky Pete – Three Beautiful Sneaky Petes this week as well!!!
2013 1011 018 – Sneaky Pete, Stabilized Dyed Ash over natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick 01 steel - $295 SOLD
2013 1011 019 – Sneaky Pete, Stabilized Dyed Black Palm over black with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
2013 1011 020 – Sneaky Pete, East Indian Rosewood over black with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
The Duke – This knife is special.
2013 1011 021 – Duke, Stabilized Dyed Box Elder Burl over black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $390 SOLD
Thank you for you interest folks.
Alrighty! I’m excited to tell you that the new method is working!!! We are doing several small batches now instead of one big batch. This has made it much more enjoyable for me. Doing a 5 or so minute step on 30 knives is torture and we had maxed out that system, and I had maxed myself out. This runs easier, and more efficiently and is saving my body a lot of pain. We have a BUNCH of knives around this place right now. I hope you all love them!
Even though we are growing, please be sure that every knife that has my initials has been hand ground by me. Also, the handle shapes are mine alone. Honestly, right now I have my hands in every process. But I wanted y’all to know that I’m not marking knives with my name that aren’t made by me.
Thank you all for the support. My family depends on y’all.
The prices this week are without sheaths. I am lucky enough to work with Rick Lowe and Heber Ellsworth for my sheaths. The make beautiful sheaths that really compliment my work. I appreciate your support for them as well.
The steel this week is 3D Spalted 01 steel and CPM 154CM.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
Shipping is included within the US. We do all our shipping on Thursdays.
Scandi – If you are a Scandi guy, I have two beauties for you today!
2013 1011 001 – Arete, Aquamarine g10 (jade over blue g10) over black g10 liners, Skeletonized full thickness tang, Scandi on 1/8” thick 01 steel - $255 SOLD
2013 1011 02 – Bushcrafter, Curly Koa over black canvas with a white g10 pinstripe, Skeletonized full thickness tang, Scandi on 1/8” thick 01 steel - $275 SOLD
The Small Knives – I’m listing the new EDC separately, so I have three knives to show together in this batch. One is a Bow Legged Joe.
2013 1011 03 – Bow Legged Joe, Tuxedo Config, Full thickness tang, Convex on 5/32” thick 01 steel - $155 SOLD
2013 1011 04 – Hiking Buddy, Arizona Desert Ironwood on black with a white g10 pinstripe, Skeletonized full thickness tang, Convex on 3/32” thick 01 steel - $230 SOLD
2013 1011 05 – Bushboot, Bloodood over black g10 with a white g10 pinstripe, Skeletonized full thickness tang, Convex on 1/8” thick 01 steel - $230 SOLD
EDCII – Well, I still love the old EDC, so I’m not cancelling it. But, I wanted to re-vamp the look with the same blade shape, so here is the new EDC. This blue Sycamore is something else too. Neato stuff.
2013 1011 006 – EDCII, Arizona Desert Ironwood over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $270 SOLD
2013 1011 007 – EDCII, Stabilized dyed Sycamore on natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel Convex on 5/32” thick 01 steel - $270 SOLD
One off, This EDC is a one of a kind prototype that came out quite good. It’s the old EDC handle style with a bit of a guard. This is a one of a kind knife and I won’t be making more.
2013 1011 008 – EDC Prototype, Osage over black g10 with a blue g10 pinstripe, Skeletonized full thickness tang, Convex on 5/32” thick 01 steel - $230 SOLD
More Nessmuks!! The recent thread about HI and ole Sarge got my juices flowing for a more traditional Nessmuk. So I broke out the old beat up pattern to get the dimensions, and came up with this knife. You could likely have guessed its measurements, which come in at 4” long blade, and a 4.5” long handle.
2013 1011 009 – Nessmuk, Arizona Desert Ironwood over black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
2013 1011 010 – Nessmuk, Stabilized dyed curly Maple on natural, Tapered tang, Convex on 1/8” thick 01 steel - $295 SOLD
Two Woodchucks – Osage and Wenge. I love holding this design.
2013 1011 011 – Woodchuck, Osage over natural canvas with an orange g10 pinstripe, Skeletonized full thickness tang, Convex on 1/8” thick 01 steel - $280 SOLD
2013 1011 012 – Woodchuck, Wenge over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 1/8” thick 01 steel - $320 SOLD
Kephart – More Wenge. Nice looking knife!
2013 1011 013 – Kephart, Wenge over black g10 with a blue g10 pinstripe, Skeletonized full thickness tang, Convex on 1/8” thick 01 steel - $255 SOLD
Snubnose – Rare one. This one has a GREAT looking full height grind!
2013 1011 014 – Snubnose, Maroon linen over natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
Bushfingers – Man, I want to keep one of these Black Palm ones!
2013 1011 015 – Bushfinger – Arizona Desert Ironwood over black g10 with a blue g10 instripe, Tapered Tang, Convex on 1/8” thick 01 steel - $295 SOLD
2013 1011 016 – Bushfinger, Stabilized Dyed (blue) Black Palm over natural canvas with an orange g10 pinstripe, Tapered Tang, Convex on 1/8” thick 01 steel - $295 SOLD
2013 1011 017 – Bushfinger, Stabilized Dyed (blue) Black Palm over natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
Sneaky Pete – Three Beautiful Sneaky Petes this week as well!!!
2013 1011 018 – Sneaky Pete, Stabilized Dyed Ash over natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick 01 steel - $295 SOLD
2013 1011 019 – Sneaky Pete, Stabilized Dyed Black Palm over black with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
2013 1011 020 – Sneaky Pete, East Indian Rosewood over black with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $295 SOLD
The Duke – This knife is special.
2013 1011 021 – Duke, Stabilized Dyed Box Elder Burl over black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 01 steel - $390 SOLD
Thank you for you interest folks.
Last edited:
.
...
:thumbup:
