Fiddleback Friday 2/14/14

Fiddleback

Knifemaker
Moderator
Knifemaker / Craftsman / Service Provider
Joined
Oct 19, 2005
Messages
19,716
I love making knives for you all. Thanks to everyone for supporting Fiddleback Forge. Its an amazing feeling to do this for a living. Fiddleback Forge depends on y’all, and we hope you love the tool you buy from us.

What a week. I hate these mid week snowstorms. If only the bad weather would just be happy ruining our weekends. The double stick in the craw is that I worked, and missed out on all the snow fun with Hannah and Lily. I think that was a biggest stress of the storm for me. We’re going to play softball all weekend to make up for it. Hannah is trying out for a travel team this weekend. Woot.

Even with the weather resisting us, we made 17 knives to show to you today. Ken, I am happy to say is very good at doing bolstered scales, so you’re going to see a lot more of them. He’s better at cutting the wood just perfectly flat and square too, so there will be a lot of bolstered wood scales. Sweet! Some things to watch for is the 3/32” thick steel blades this week! That’s rare. And there is a Small Gaucho knife and a Toothpik. Some of the rarest Fiddlebacks! I hope you like them.

The steel this week is 3D Spalted 01 steel and CPM 154 with Fiddleback Textured Flats.

Please note that the SS is a big thicker than the measurement I order because most folks surface grind to size. So this means 1/8” thick blades are really ~0.140” thick.

Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.

Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.

Shipping is included within the US. Ken has taken over the shipping department and we are going to be setting up a special e-mail address for all questions or concerns regarding shipping. I’ll give that out when the new website is launced.



Small Knives. I have a few excellent looking small knives this week. Two Rapors and a Hiking Buddy made from 3/32” thick 3D Spalted 01 steel. Then two Tuxedo Config 1/8” thick little handy knives as well.

20140214IMG_2230-vi.jpg


20140214IMG_2232-vi.jpg


20140214IMG_2233-vi.jpg


20140214IMG_2235-vi.jpg


20140214IMG_2236-vi.jpg


20140214IMG_2239-vi.jpg


20140214IMG_2240-vi.jpg


20140214IMG_2241-vi.jpg


2014 0214 001 – Bushraptor, Arizona Desert Ironwood over natural canvas with an orange g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $240

2014 0214 002 – Bushraptor, Slate g10 over black g10 with a white g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $240

2014 0214 003 – Hiking Buddy, Marblewood over natural canvas with a blue g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $240

2014 0214 004 – Bushboot, Tuxedo Config, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200

2014 0214 005 – EDCII, Tuxedo Config, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200







Two Special Standalones. A Small Gaucho, and a one of a kind KE Bushie with a guard!!

20140214IMG_2242-vi.jpg


20140214IMG_2243-vi.jpg


20140214IMG_2244-vi.jpg


20140214IMG_2245-vi.jpg


2014 0214 006 – Small Gaucho, Stabilized and Dyed Black Palm over black g10 with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick Fiddltextured CPM 154 steel - $300

2014 0214 007 – KE Bushie with a guard (one of a kind), Stabilized Box Elder burl over natural canvas with a lime green g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $275







American Classics Series –The Nessmuk Knife. George Washgington Sears was an outdoor writer for the magazine that has become Field And Stream. He was the first ultra light gear fanatic. He wrote about camping, hiking and canoeing in the Adirondacks circa 1880.

20140214IMG_2248-vi.jpg


20140214IMG_2249-vi.jpg


20140214IMG_2251-vi.jpg


20140214IMG_2252-vi.jpg


20140214IMG_2253-vi.jpg


2014 0214 008 – Nessmuk, Wenge with natural canvas bolsters and liners, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $305

2014 0214 009 – Nessmuk, Black and blue g10 over black g10 with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick Fiddltextured CPM 154 steel - $325

2014 0214 010 – Nessmuk, Gorgeous Knife, Bone white linen micarta over natural canvas with a lime green g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $305






Bushfingers. I have three excellent Bushfingers this week. Two of them feature very economical handled tapered tangs, and in addition, I have an outstanding SFT Tang with bolsters.

20140214IMG_2246-vi.jpg


20140214IMG_2247-vi.jpg


2014 0214 011 – Bushfinger, Black canvas on black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $265

2014 0214 012 – Bushfinger, Stabilized and dyed curly and quartersawn Red Oak on black canvas with black canvas bolsters, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $315

2014 0214 013 – Bushfinger, Tuxedo Config, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $265








Sneaky Petes – I love this mode. It features my best handle.

20140214IMG_2254-vi.jpg


20140214IMG_2255-vi.jpg


20140214IMG_2257-vi.jpg


20140214IMG_2256-vi.jpg


20140214IMG_2258-vi.jpg


2014 0214 014 – Sneaky Pete, Green and black linen micarta over natural canvas with a green g10 pinstripe, SFT Tang, Convex on 5/32” thick 3D Spalted 01 steel - $265

2014 0214 015 – Sneaky Pete, Maroon linen over natural canvas with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $265



Woodsman Clan – Of course, the Toothpik is a longer Woodsman. Two beauties from this family today! Hope you like them!

20140214IMG_2259-vi.jpg


20140214IMG_2262-vi.jpg


20140214IMG_2261-vi.jpg


2014 0214 016 – Woodsman, Stabilized and dyed curly and quartersawn Red Oak (outstanding), SFT Tang, Convex on 5/32” thick 3D Spalted 01 steel - $350

2014 0214 017 – Fiddleback Toothpik, Stabilized Box Elder Burl with black canvas bolsters and a lime green g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick 3D Spalted 01 steel - $440






Thank you for your interest folks.
 
Please
2014 0214 004 – Bushboot, Tuxedo Config, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200
 
I'd like:

2014 0214 002 – Bushraptor, Slate g10 over black g10 with a white g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $240
 
2014 0214 016 – Woodsman, Stabilized and dyed curly and quartersawn Red Oak (outstanding), SFT Tang, Convex on 5/32” thick 3D Spalted 01 steel - $350
Buy:
Phil
 
Andy, I'll take: 2014 0214 012 – Bushfinger, Stabilized and dyed curly and quartersawn Red Oak on black canvas with black canvas bolsters, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $315 please!

-- Thanks,

Will
 
Last edited:
Dang! Seconds on the bushboot.
2014 0214 004 – Bushboot, Tuxedo Config, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200
 
I'll take the
2014 0214 006 – Small Gaucho, Stabilized and Dyed Black Palm over black g10 with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick Fiddltextured CPM 154 steel - $300

Thanks!
 
I'll take 2014 0214 017 – Fiddleback Toothpik, Stabilized Box Elder Burl with black canvas bolsters and a lime green g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick 3D Spalted 01 steel - $440
 
2014 0214 017 – Fiddleback Toothpik, Stabilized Box Elder Burl with black canvas bolsters and a lime green g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick 3D Spalted 01 steel - $440 please
 
sweet batch Andy! Was a bit tempted by the maroon Sneaky. Looks like it went to a loving home :D

Looks like you lost out with that please Willic.. :o
 
i'll take the 2014 0214 003 – Hiking Buddy, Marblewood over natural canvas with a blue g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $240
 
I'll take the 2014 0214 005 – EDCII, Tuxedo Config, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200. Thanks
 
2014 0214 011 – Bushfinger, Black canvas on black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $265

Please Sir!
 
Back
Top