- Joined
- Oct 19, 2005
- Messages
- 19,763
As always, my first priority is to thank all of you. Fiddleback Forge depends on y’all, and we hope you love the tool you buy from us.
Welcome back to Fiddleback Friday! Thank you again for taking the time to look at my work this week. I have a bunch of knives to offer this week. One of them is a personal knife, that comes with a Fiddleback made sheath.
The prices this week are without sheaths except for the personal ones. I am lucky enough to work with both Heber Ellsworth and Rick Lowe. Both make fantastic sheaths that are completely different from one another. I appreciate your support for them as well.
All of the steel this week is 3D Spalted 01 except on the Gentlemens Steak Knife, which is made from CPM 154cm.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
Shipping is included within the US. We do all our shipping on Thursdays.
Gaucho – I made this sheath for the contest, and this knife turned out so pretty that I couldn’t resist keeping it for a while. It has been restored to as new condition, and is offered as new. The sheath is made by me and is lined with soft lambskin. It has a clip on the back and is intended to ride in the pocket.
2013 0628 001 –Gaucho, Drunken burlap micarta from Shadetree with black canvas liners and bolsters, Mosaic Pin, Tapered Tang, Convex on 1/8” thick steel - $360 shipped with sheath
Bushcraft Karda – 1/8” thick od over nat goodie with a mosaic pin.
2013 0628 02 – Bushcraft Karda, OD on natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $245 SOLD
Bushboots – I can’t get enough of Bushboots lately. These are stunners! One with a full thickness tang and pretty handle as requested.
2013 0628 03 – Bushboot, 2x2 blue and black g10 with black bolsters and liners, Mosaic Pin, Tapered Tang, Convex on 1/8” thick steel - $285
2013 0628 004 – Bushboot, Stabalized Maple burl over black with a blue g10 pinstripe, Full Thickness Tang, Convex on 5/32” thick steel - $230 SOLD
Kepharts – Two pretty Scandi’s, also by request!
2013 0628 005 – Kephart, Orange burst g10, Full Thickness Tang, Scandi on 1/8” thick steel - $250 SOLD
2013 0628 006 – Kephart, Stabilized curly quartersawn spalted White Oak on black with a lime green g10 pinstripe, Full Thickness Tang, Scandi on 1/8” thick steel - $250 SOLD
2013 0628 007 – Kephart, Black canvas on black with a lime green g10 pinstripe, Tapered Tagn, Convex on 5/32” thick steel - $265 SOLD
Bushfinger extravaganza yet again this week. Lots of maroon on natural micarta!
2013 0628 008 – Bushfinger, Maroon linen on natural canvas with a white g10 whitewall, Full Thickness Tang, Convex on 5/32” thick steel - $250 SOLD
2013 0628 009 – Bushfinger, Maroon linen scales with natural canvas liners and bolsters, Full Thickness Tang, Scadi on 1/8” thick steel - $250 SOLD
2013 0628 010 – Bushfinger, White linen on natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $265
2013 0628 011 – Bushfinger, Black burlap from Shadetree on black canvas bolsters and liners, Tapered Tang, Convex on 5/32” thick steel - $310
Fiddleback Paring Knife – This is CPM 154cm and has as close to a zero grind as I’ve ever done.
2013 0628 012 – Paring Knife, Black on black with a lime green pinstripe, Full Thickness Tang, CPM 154cm steel, 0.090” thick - $285
Woodsman – This week’s Woodsman is a stunner. The wood on this handle is stabilized and dyed figured crotchwood.
2013 0628 013 – Woodsman, Stabilized dyed Walnut crotchwood on black with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $390 SOLD
Thanks again for looking guys. This all happens because of your interest!
Welcome back to Fiddleback Friday! Thank you again for taking the time to look at my work this week. I have a bunch of knives to offer this week. One of them is a personal knife, that comes with a Fiddleback made sheath.
The prices this week are without sheaths except for the personal ones. I am lucky enough to work with both Heber Ellsworth and Rick Lowe. Both make fantastic sheaths that are completely different from one another. I appreciate your support for them as well.
All of the steel this week is 3D Spalted 01 except on the Gentlemens Steak Knife, which is made from CPM 154cm.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
Shipping is included within the US. We do all our shipping on Thursdays.
Gaucho – I made this sheath for the contest, and this knife turned out so pretty that I couldn’t resist keeping it for a while. It has been restored to as new condition, and is offered as new. The sheath is made by me and is lined with soft lambskin. It has a clip on the back and is intended to ride in the pocket.
2013 0628 001 –Gaucho, Drunken burlap micarta from Shadetree with black canvas liners and bolsters, Mosaic Pin, Tapered Tang, Convex on 1/8” thick steel - $360 shipped with sheath
Bushcraft Karda – 1/8” thick od over nat goodie with a mosaic pin.
2013 0628 02 – Bushcraft Karda, OD on natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $245 SOLD
Bushboots – I can’t get enough of Bushboots lately. These are stunners! One with a full thickness tang and pretty handle as requested.
2013 0628 03 – Bushboot, 2x2 blue and black g10 with black bolsters and liners, Mosaic Pin, Tapered Tang, Convex on 1/8” thick steel - $285
2013 0628 004 – Bushboot, Stabalized Maple burl over black with a blue g10 pinstripe, Full Thickness Tang, Convex on 5/32” thick steel - $230 SOLD
Kepharts – Two pretty Scandi’s, also by request!
2013 0628 005 – Kephart, Orange burst g10, Full Thickness Tang, Scandi on 1/8” thick steel - $250 SOLD
2013 0628 006 – Kephart, Stabilized curly quartersawn spalted White Oak on black with a lime green g10 pinstripe, Full Thickness Tang, Scandi on 1/8” thick steel - $250 SOLD
2013 0628 007 – Kephart, Black canvas on black with a lime green g10 pinstripe, Tapered Tagn, Convex on 5/32” thick steel - $265 SOLD
Bushfinger extravaganza yet again this week. Lots of maroon on natural micarta!
2013 0628 008 – Bushfinger, Maroon linen on natural canvas with a white g10 whitewall, Full Thickness Tang, Convex on 5/32” thick steel - $250 SOLD
2013 0628 009 – Bushfinger, Maroon linen scales with natural canvas liners and bolsters, Full Thickness Tang, Scadi on 1/8” thick steel - $250 SOLD
2013 0628 010 – Bushfinger, White linen on natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $265
2013 0628 011 – Bushfinger, Black burlap from Shadetree on black canvas bolsters and liners, Tapered Tang, Convex on 5/32” thick steel - $310
Fiddleback Paring Knife – This is CPM 154cm and has as close to a zero grind as I’ve ever done.
2013 0628 012 – Paring Knife, Black on black with a lime green pinstripe, Full Thickness Tang, CPM 154cm steel, 0.090” thick - $285
Woodsman – This week’s Woodsman is a stunner. The wood on this handle is stabilized and dyed figured crotchwood.
2013 0628 013 – Woodsman, Stabilized dyed Walnut crotchwood on black with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $390 SOLD
Thanks again for looking guys. This all happens because of your interest!
Last edited:
