Fiddleback Friday - 7/26/13

Fiddleback

Knifemaker
Moderator
Knifemaker / Craftsman / Service Provider
Joined
Oct 19, 2005
Messages
19,782
As always, my first priority is to thank all of you. Fiddleback Forge depends on y’all, and we hope you love the tool you buy from us.

Hello everyone. I have a batch of knives for y’all this week all ready to go. I hope you like them. Next week we are taking the beach trip we promised to Lily earlier in the summer. She wants to do a scavenger hunt. I will have a batch on Friday though. I have the knives all set aside.

Thank you all for the support. My family depends on y’all.

The prices this week are without sheaths. I am lucky enough to work with both Heber Ellsworth and Rick Lowe. Both make fantastic sheaths that are completely different from one another. I appreciate your support for them as well.


All of the steel this week is 3D Spalted 01.

Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.

Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.

Shipping is included within the US. We do all our shipping on Thursdays.



The Smaller Knives – Two Hiking Buddies, and EDC and a Bushboot in this group!

20130726IMG_0435-vi.jpg


20130726IMG_0436-vi.jpg


2013 0726 001 – Bushboot, Doublemint Handle Config, Full Thickness Tang, Scandi on 1/8” thick steel - $225 Sold

2013 0726 02 – EDC, Blue burlap from Shadetree over black g10 liners with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $265 Sold

2013 0726 03 – Hiking Buddy, Cofee Bag Burlap from Shadetree on nat can with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $265 Sold

2013 0726 004 – Hiking Buddy, Osage Orange on nat can with an orange g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $265 Sold









Gaucho Knife – Nice OD canvas and a mosaic pin too!

20130726IMG_0440-vi.jpg


20130726IMG_0441-vi.jpg



2013 0726 005 – Gaucho Knife, OD Canvas on natural canvas with a white g10 pinstripe, Tapered Tang, Mosaic Pin, Convex on 1/8” thick steel - $290







KPH – Osage!

20130726IMG_0437-vi.jpg


20130726IMG_0438-vi.jpg


20130726IMG_0439-vi.jpg


2013 0726 006 – KPH, Osage Orange on natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $290 Sold








Kepharts – This weeks Kepharts are both knives I want to keep!

20130726IMG_0442-vi.jpg


20130726IMG_0443-vi.jpg


20130726IMG_0444-vi.jpg


20130726IMG_0445-vi.jpg


20130726IMG_0446-vi.jpg


2013 0726 007 – Kephart, Waterfall Bubinga over black g10 liners with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $300

2013 0726 008 – Kephart, Antique Canvas Micarta over natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $290










Terassaur – Osage!

20130726IMG_0447-vi.jpg


20130726IMG_0448-vi.jpg


2013 0726 009 – Terassaur, Osage Orange over natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $290









Sneaky Pete – Scandi this time!

20130726IMG_0449-vi.jpg


20130726IMG_0451-vi.jpg


20130726IMG_0450-vi.jpg


2013 0726 010 – Sneaky Pete, Gem Quality curly Maple over black g10 liners with a lime green g10 pinstripe, Scandi on 1/8” thick steel - $290Sold







Bushfingers – Both of these are excellent representations of this model!

20130726IMG_0452-vi.jpg


20130726IMG_0453-vi.jpg


20130726IMG_0455-vi.jpg


20130726IMG_0454-vi.jpg


2013 0726 011 – Bushfinger, Drunken Burlap from Shadetree over black g10 liners with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $290

2013 0726 012 – Bushfinger, Stabilized Dyed Black Palm over black g10 liners with a white g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $290Sold






Woodsman – I love the handle on this knife. Honduran Rosewood is some of the prettiest stuff I every use.

20130726IMG_0456-vi.jpg


20130726IMG_0457-vi.jpg


20130726IMG_0458-vi.jpg


20130726IMG_0459-vi.jpg


2013 0726 013 – Woodsman, Honduran Rosewood over black with an orange g10 pinstripe, Full Thickness Tang, Convex on 5/32” thick steel - $325





Thanks again for looking guys. This all happens because of your interest!
 
Last edited:
Beautiful batch Andy, love the coffee bad and drunken burlap. I'd be all over that drunken Bushfinger if it was on 1/8. Keep up the great work!

Cheers,
David
 
2013 0726 004 – Hiking Buddy, Osage Orange on nat can with an orange g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $265

Mine Please.

Thanks,
Bill
 
I'll take it: 2013 0726 03 – Hiking Buddy, Cofee Bag Burlap from Shadetree on nat can with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $265
 
I'll take the sneaky pete - 2013 0726 010 – Sneaky Pete, Gem Quality curly Maple over black g10 liners with a lime green g10 pinstripe, Scandi on 1/8” thick steel - $290

*** paid the Man **
 
Last edited:
Very nice ones in there today. Love the osage as always. That Terassaur is a real beaut. Have you ever done green canvas micarta liners with the osage? I was thinking that combo would look sharp.
 
2013 0726 004 – Hiking Buddy, Osage Orange on nat can with an orange g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $265

Mine Please.

Thanks,
Bill

You got it Bill. Thanks!!!

Ill take the KPH.

Its yours then Lorsbach. Thank You.

I'll take it: 2013 0726 03 – Hiking Buddy, Cofee Bag Burlap from Shadetree on nat can with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick steel - $265

Forager! Hey. You got the knife. Thanks!

I'll take the sneaky pete - 2013 0726 010 – Sneaky Pete, Gem Quality curly Maple over black g10 liners with a lime green g10 pinstripe, Scandi on 1/8” thick steel - $290

Hi JD. Thanks for buying this knife.

2013072602 edc for 265.00 i will take it

You got it Rory! I'm glad. Payment instructions are in the opening of the initial post! Thanks for the support.
 
I'll take 2013 0726 012, Bushfinger, Black Palm $290. Thanks, some pretty knives.
Rich
PM sent requesting change (if possible, since shipping is not until Thursday). Instead I would like 2013 0726 011, the Bushfinger 5/32" Drunken Burlap, same price. Decided I'd like the thicker blade better. If it turns out it's too late to change, I'll be bummed, but still happy to have a Bushfinger.

Change made 7/31. 011 Drunken Burlap Bushfinger is SOLD.
012 Stabilized Black Palm is still available.
 
Last edited:
Hi Andy,

I'll take the 0726 001 – Bushboot, Doublemint Handle Config, Full Thickness Tang, Scandi on 1/8” thick steel - $225

Lee
 
Andy - the terassaur is a beauty! It would be mine if only scandi. Keep up the great work!
 
Hi Andy,

I'll take the 0726 001 – Bushboot, Doublemint Handle Config, Full Thickness Tang, Scandi on 1/8” thick steel - $225

Lee

You made my morning Lee. Thank You.
 
I marked everything guys. The Gaucho has a 4" blade and 4.5" handle. (Most of my knives are working out this way, huh?
 
Back
Top