- Joined
- Oct 19, 2005
- Messages
- 19,791
As always, my first priority is to thank all of you. Fiddleback Forge depends on yall, and we hope you love the tool you buy from us.
This week is the time to get Fiddlebacks if you are into metal pins. I had a drillbit that was was undersized this week, and had to switch to metal pins in a pinch. It was a good exercise to keep us on our toes around here, but not something I wish to happen again. There is an extra 6 or 8 hours in this batch. Next week will begin the new precaution of measuring each drill bit before using it. And of course, well be back to the phenolic pins.
Thank you all for the support. My family depends on yall.
The prices this week are without sheaths. I am lucky enough to work with both Heber Ellsworth and Rick Lowe. Both make fantastic sheaths that are completely different from one another. I appreciate your support for them as well.
The steel this week is 3D Spalted 01 steel and also CPM 154CM.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesnt cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
Shipping is included within the US. We do all our shipping on Thursdays.
The Smaller Knives A Runt and an EDKarda start us off. Both Tuxedo, 3/32 thick steel with full thickness tangs and SS pins.
2013 0830 001 Runt, Tuxedo Config, Skeletonized Tang, Convex on 3/32 thick 01 steel - $155 SOLD
2013 0830 02 Karda, Tuxedo Config, Skeletonized Tang, Scandi on 3/32 thick 01 steel - $200
Kephart This is a pretty Kephart with a Scandi grind on 0.110 thick CPM 154CM and a stabilized dyed Black Palm handle with SS pins.
2013 0830 03 Kephart, Stabilized Dyed Black Palm on black g10 with a white g10 pinstripe, Skeletonized Tang, Scandi on 0.110 thick CPM 154CM steel - $310
Bushcrafter This is a sweet knife. The Bocote is beautiful, but this is just a good hard working knife.
2013 0830 004 Bushcrafter, Bocote over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 5/32 thick 01 steel - $290
KPH Bloodwood. Pretty knife.
2013 0830 005 KPH, Bloodwood on black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32 thick 01 steel - $290 SOLD
Ladyfinger Gem Quality Curly Maple!!!
2013 0830 006 Ladyfinger, Stabilized and Dyed Gem Quality Curly Maple on black g10 liners with a lime green g10 pinstripe, Skeletonized Tang, Convex on 1/8 thick 01 steel - $250 SOLD
Arete Pretty Stabilized Walnut.
2013 0830 007 Arete, Stabilized Walnut over natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 1/8 thick steel - $300
Recluse. African Blackwood.
2013 0830 008 Recluse, African Blackwood over natural canvas with a blue g10 pinstripe, Skeletonized Tang, Convex on 5/32 thick steel - $265
Sneaky Petes I want to keep all four of the new models that are up this week. Ive been carrying the Sneaky Pete, and it is an excellent bushcrafting knife.
2013 0830 009 Sneaky Pete, Orange Burst G10 (only available at FF), Tapered Tang, Convex on 5/32 thick 01 steel - $290 Sold
2013 0830 010 Sneaky Pete, Nat on nat canvas with an orange g10 pinstripe, Tapered Tang, Convex on 5/32 thick 01 steel - $265
Bushfingers The Bushfingers this week are epic IMO. I want both of these convex ones!
2013 0830 011 Bushfinger, Stabilized Curly Koa over black g10 with a white g10 pinstripe, Tapered Tang, Convex on 5/32 thick CPM 154 CM steel - $350 SOLD
2013 0830 012 Bushfinger, Osage Orange over natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 1/8 thick 01 steel - $290 SOLD
2013 0830 013 Bushfinger, Natural Canvas on black g10 with a white g10 pinstripe, Skeletonized Tang, Scandi on 1/8 thick steel - $225
Woodchucks I want to keep this natural canvas one so bad.
2013 0830 014 Woodchuck, Nat on natural canvas with an orange g10 pinstripe, Tapered Tang, Convex on 1/8 thick 01 steel - $290
2013 0830 015 Woodchuck, Stabilized Dyed Crotch Maple on nat canvas with a white g10 pinstripe, Skeletonized Tang, Convex on 1/8 thick 01 steel - $285 SOLD
Bushcrafter Sr This is a slicer! Prettiest piece of Osage ever!
2013 0830 016 Bushcrafter Sr, Osage over natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 1/8 thick 01 steel - $315 SOLD
Thanks again for looking guys. This all happens because of your interest!
This week is the time to get Fiddlebacks if you are into metal pins. I had a drillbit that was was undersized this week, and had to switch to metal pins in a pinch. It was a good exercise to keep us on our toes around here, but not something I wish to happen again. There is an extra 6 or 8 hours in this batch. Next week will begin the new precaution of measuring each drill bit before using it. And of course, well be back to the phenolic pins.
Thank you all for the support. My family depends on yall.
The prices this week are without sheaths. I am lucky enough to work with both Heber Ellsworth and Rick Lowe. Both make fantastic sheaths that are completely different from one another. I appreciate your support for them as well.
The steel this week is 3D Spalted 01 steel and also CPM 154CM.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesnt cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
Shipping is included within the US. We do all our shipping on Thursdays.
The Smaller Knives A Runt and an EDKarda start us off. Both Tuxedo, 3/32 thick steel with full thickness tangs and SS pins.
2013 0830 001 Runt, Tuxedo Config, Skeletonized Tang, Convex on 3/32 thick 01 steel - $155 SOLD
2013 0830 02 Karda, Tuxedo Config, Skeletonized Tang, Scandi on 3/32 thick 01 steel - $200
Kephart This is a pretty Kephart with a Scandi grind on 0.110 thick CPM 154CM and a stabilized dyed Black Palm handle with SS pins.
2013 0830 03 Kephart, Stabilized Dyed Black Palm on black g10 with a white g10 pinstripe, Skeletonized Tang, Scandi on 0.110 thick CPM 154CM steel - $310
Bushcrafter This is a sweet knife. The Bocote is beautiful, but this is just a good hard working knife.
2013 0830 004 Bushcrafter, Bocote over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 5/32 thick 01 steel - $290
KPH Bloodwood. Pretty knife.
2013 0830 005 KPH, Bloodwood on black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32 thick 01 steel - $290 SOLD
Ladyfinger Gem Quality Curly Maple!!!
2013 0830 006 Ladyfinger, Stabilized and Dyed Gem Quality Curly Maple on black g10 liners with a lime green g10 pinstripe, Skeletonized Tang, Convex on 1/8 thick 01 steel - $250 SOLD
Arete Pretty Stabilized Walnut.
2013 0830 007 Arete, Stabilized Walnut over natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 1/8 thick steel - $300
Recluse. African Blackwood.
2013 0830 008 Recluse, African Blackwood over natural canvas with a blue g10 pinstripe, Skeletonized Tang, Convex on 5/32 thick steel - $265
Sneaky Petes I want to keep all four of the new models that are up this week. Ive been carrying the Sneaky Pete, and it is an excellent bushcrafting knife.
2013 0830 009 Sneaky Pete, Orange Burst G10 (only available at FF), Tapered Tang, Convex on 5/32 thick 01 steel - $290 Sold
2013 0830 010 Sneaky Pete, Nat on nat canvas with an orange g10 pinstripe, Tapered Tang, Convex on 5/32 thick 01 steel - $265
Bushfingers The Bushfingers this week are epic IMO. I want both of these convex ones!
2013 0830 011 Bushfinger, Stabilized Curly Koa over black g10 with a white g10 pinstripe, Tapered Tang, Convex on 5/32 thick CPM 154 CM steel - $350 SOLD
2013 0830 012 Bushfinger, Osage Orange over natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 1/8 thick 01 steel - $290 SOLD
2013 0830 013 Bushfinger, Natural Canvas on black g10 with a white g10 pinstripe, Skeletonized Tang, Scandi on 1/8 thick steel - $225
Woodchucks I want to keep this natural canvas one so bad.
2013 0830 014 Woodchuck, Nat on natural canvas with an orange g10 pinstripe, Tapered Tang, Convex on 1/8 thick 01 steel - $290
2013 0830 015 Woodchuck, Stabilized Dyed Crotch Maple on nat canvas with a white g10 pinstripe, Skeletonized Tang, Convex on 1/8 thick 01 steel - $285 SOLD
Bushcrafter Sr This is a slicer! Prettiest piece of Osage ever!
2013 0830 016 Bushcrafter Sr, Osage over natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 1/8 thick 01 steel - $315 SOLD
Thanks again for looking guys. This all happens because of your interest!
Last edited:
