Flash II--How To Reassemble?!

Radjxf

Radjxf

Joined
Apr 8, 2006
Messages
288
So I took my son's Flash II apart as it was nasty dirty, full of lint, crud, etc.

I had no idea there were so many little pieces in there! I think I have all the little parts, detent balls, springs, etc.

No matter which way I put it together, it isn't working. We paid $15 at a pawn shop, and don't want to pay SOG $20 to reassemble it.

Anyone have a schematic or pics of how the release mechanism and blade spring go back in? I know, I'm a 'tard--any help very much appreciated.
 
Thanks a lot for the vid. I'd actually got it back together just before your post.

However, I have to have the blade screwed down pretty loose for it to flip open. Maybe the spring needs to be wound one more turn?
 
From what I remember putting it back together as long as you have everything, it should only go together one way. Make sure the larger round spring is set in the handle and blade right and you shouldn't have any problems.
 
You must log in or register to reply here.
Back
Top