- Joined
- Dec 17, 1999
- Messages
- 4,117
Fox/Derespina collabpration XL Karambits!!!
--------------------------------------------------------------------------------
Yup! They are just about available. I have a few for sale, no boxes though. Thye will come in Derespina Knives sacks. Here are two I am offering. One is my Model 3 Karambit Parong style. In a Black coated N690Co steel!!! Very nice stuff and very sharp. The blade is a smidge under 4". The G10 is nice a textured and THICK! They did an awesome job on these quality wise. However these are both for XL sized fellas or ladies.
The second is a tiger striped traditional hooked "Kuku Hanuman" Karambit.
Seriously, you MUST have a greater than 4" width hand. Atleast 4 1/2" from outside knuckle to outside knuckle. These are larger than average handled Karambits and I want anyone who purchases them to be completely satisfied with their feel. The over all quality is AWESOME!
They run approzimately 5" on the handle so the closer you are the more comfy it will be.
There was a translation problem (I guess) between my inch measurements and their metric measurements(Italy). So they misunderstood my design and went with a much larger handle than I wanted.
There are only 300 of these each made. I only have a couple each at the moment but can get more if need be.
There will be a 4" handled version for the rest of us available hopefully by the end of the year. But these are ready now.
They come with a high quality Kydex sheath with a belt clip but they can also accomodate a Tek Lock.
The retail on them is $128 for the Parong and $120. for the hooked blade but you can get them right now from me for just $old pending each shipped conus!!!!
After the 4 or so that I have are gone, they will only be available at retail cost. So get em' while they are hot folks!
Thanks for looking!
R
You can see pics here a these links. There are a lot of pics so please review them all.
http://www.bladeforums.com/forums/attachment.php?attachmentid=92972&d=1206579035
http://www.bladeforums.com/forums/attachment.php?attachmentid=92973&d=1206579043
http://www.bladeforums.com/forums/attachment.php?attachmentid=92974&d=1206579051
http://www.bladeforums.com/forums/attachment.php?attachmentid=92975&d=1206579062
http://www.bladeforums.com/forums/attachment.php?attachmentid=92976&d=1206579070
http://www.bladeforums.com/forums/attachment.php?attachmentid=92977&d=1206579120
http://www.bladeforums.com/forums/attachment.php?attachmentid=92978&d=1206579127
http://www.bladeforums.com/forums/attachment.php?attachmentid=92979&d=1206579133
http://www.bladeforums.com/forums/attachment.php?attachmentid=92980&d=1206579144
http://www.bladeforums.com/forums/attachment.php?attachmentid=92981&d=1206579156
http://www.bladeforums.com/forums/attachment.php?attachmentid=92982&d=1206579201
http://www.bladeforums.com/forums/attachment.php?attachmentid=92983&d=1206579208
http://www.bladeforums.com/forums/attachment.php?attachmentid=92985&d=1206579229
--------------------------------------------------------------------------------
Yup! They are just about available. I have a few for sale, no boxes though. Thye will come in Derespina Knives sacks. Here are two I am offering. One is my Model 3 Karambit Parong style. In a Black coated N690Co steel!!! Very nice stuff and very sharp. The blade is a smidge under 4". The G10 is nice a textured and THICK! They did an awesome job on these quality wise. However these are both for XL sized fellas or ladies.
The second is a tiger striped traditional hooked "Kuku Hanuman" Karambit.
Seriously, you MUST have a greater than 4" width hand. Atleast 4 1/2" from outside knuckle to outside knuckle. These are larger than average handled Karambits and I want anyone who purchases them to be completely satisfied with their feel. The over all quality is AWESOME!
They run approzimately 5" on the handle so the closer you are the more comfy it will be.
There was a translation problem (I guess) between my inch measurements and their metric measurements(Italy). So they misunderstood my design and went with a much larger handle than I wanted.
There are only 300 of these each made. I only have a couple each at the moment but can get more if need be.
There will be a 4" handled version for the rest of us available hopefully by the end of the year. But these are ready now.
They come with a high quality Kydex sheath with a belt clip but they can also accomodate a Tek Lock.
The retail on them is $128 for the Parong and $120. for the hooked blade but you can get them right now from me for just $old pending each shipped conus!!!!
After the 4 or so that I have are gone, they will only be available at retail cost. So get em' while they are hot folks!
Thanks for looking!
R
You can see pics here a these links. There are a lot of pics so please review them all.
http://www.bladeforums.com/forums/attachment.php?attachmentid=92972&d=1206579035
http://www.bladeforums.com/forums/attachment.php?attachmentid=92973&d=1206579043
http://www.bladeforums.com/forums/attachment.php?attachmentid=92974&d=1206579051
http://www.bladeforums.com/forums/attachment.php?attachmentid=92975&d=1206579062
http://www.bladeforums.com/forums/attachment.php?attachmentid=92976&d=1206579070
http://www.bladeforums.com/forums/attachment.php?attachmentid=92977&d=1206579120
http://www.bladeforums.com/forums/attachment.php?attachmentid=92978&d=1206579127
http://www.bladeforums.com/forums/attachment.php?attachmentid=92979&d=1206579133
http://www.bladeforums.com/forums/attachment.php?attachmentid=92980&d=1206579144
http://www.bladeforums.com/forums/attachment.php?attachmentid=92981&d=1206579156
http://www.bladeforums.com/forums/attachment.php?attachmentid=92982&d=1206579201
http://www.bladeforums.com/forums/attachment.php?attachmentid=92983&d=1206579208
http://www.bladeforums.com/forums/attachment.php?attachmentid=92985&d=1206579229
