I took my Haddock apart to re-grease and was not paying attention. I need to make sure I put the washers in with the correct orientation.
There are 3 washers:
I put the black Teflon washer on the titanium locking side.
I put the thin white Teflon washer on the G-10 side adjacent to the blade.
I put the bronze washer on the G-10 side adjacent to the G-10 scale.
The knife works perfectly like this, but I was hoping someone can verify if this is correct.
Thanks.
There are 3 washers:
I put the black Teflon washer on the titanium locking side.
I put the thin white Teflon washer on the G-10 side adjacent to the blade.
I put the bronze washer on the G-10 side adjacent to the G-10 scale.
The knife works perfectly like this, but I was hoping someone can verify if this is correct.
Thanks.