Help a fellow forumite out with some Microtech screws

[Misanthropia]

I had an unfortunate incident with my beloved Microtech Whaleshark recently in which the pocket clip got caught on a bed and pull one of the proprietary screws loose. Unfortunately my only two options are spending $15 and letting Microtech have my knife for a month (something I'm a bit apprehensive about) or spend $30 to get myself a bit. Considering I just need to tighten a screw, neither of these options is terribly appealing. I was hoping that someone on the forum might have the bit for Microtech's triangle screws that they could let me borrow, I would be willing to send you a deposit via paypal to ensure that the bit gets returned safely to you.

Thanks for your help guys! :thumbup:

 

[TheAndrew]

you could try using a pair of snap ring pliers if you have any. Wish I had the bit to let you borrow. Good luck

 

[Misanthropia]

you could try using a pair of snap ring pliers if you have any. Wish I had the bit to let you borrow. Good luck

Thanks man, I'll try that out. Someone suggested using the chuck on a drill bit which did work a little bit, but it wasn't totally sufficient.