Help with lock

Joined
Jul 29, 2015
Messages
3
Hey I'm so i have this pocket knife which had a lock so when i open it its supposed to lock the blade but it doesn't so i need help fixing it.
a27a810df19d85798df507b68d4c5c94.jpg
 
Looks like a lock back knife with a broken/bent spring. What brand of knife is this s? Who made it?
 
Step One: close the knife halfway. There may be a square notch in the round part of the blade by the handle. If this is a lockback, that notch is part of the locking mechanism. Is there gunk/lint/dirt in it? If so, clean it out. That may solve the locking problem.
 
Step One: close the knife halfway. There may be a square notch in the round part of the blade by the handle. If this is a lockback, that notch is part of the locking mechanism. Is there gunk/lint/dirt in it? If so, clean it out. That may solve the locking problem.

i did its kinda dirty but it is a very light layer of it
70d29ebc86e1028e45255bf79e4fea09.jpg
 
Clean it with an old toothbrush or toothpick, get the crud out of the locking area.
 
i did its kinda dirty but it is a very light layer of it
70d29ebc86e1028e45255bf79e4fea09.jpg
that don't look right something's wrong with that configuration I just can't put my finger on what the problem is.what is that lever on the right hand side of the blade as you look at the photo.
something just don't look like about this knife. but hell I ain't no expert or nothing just saying. why is the blade off center??
 
Last edited:
that don't look right something's wrong with that configuration I just can't put my finger on what the problem is.what is that lever on the right hand side of the blade as you look at the photo.
something just don't look like about this knife. but hell I ain't no expert or nothing just saying. why is the blade off center??

There's 2 blades
 
i did its kinda dirty but it is a very light layer of it
70d29ebc86e1028e45255bf79e4fea09.jpg

Either the lock bar is digned up badly, or it looks like the lock bar snapped at the turn down for the lock itself. In this photo it looks like the lock bar where it would interface with the blade lock seat is broken.

Can you get a clearer photo of the lock bar and the lock interface?

Try natural lighting with no flash for less glare.
 
Back
Top