Hinderer xm-18

Status
Not open for further replies.
Gideons said:
Yes, DLT Trading has an exclusive XM-18 with no choil. However these are produced in batches, I would recommend signing up for product alerts via this page: https://www.dlttrading.com/rick-hinderer-knives . This way you will get an email notification before they're in stock so you don't need to keep checking the site yourself.
Click to expand...
This gentleman is absolutely correct.
here is a picture of the one you sold me a couple years ago G Gideons
I still cherish it :)

UNO7PXa.jpg
 
Yes there are standard thickness XM-18s in both 3" and 3.5", spanto and slicer grinds. As mentioned above, they're DLT exclusives. Most are 6th generation XMs, but there was at last one run of No choil 3.5" slicers made in the 4th generation.
 
Sorry to be the bearer of bad news, but you just missed a batch of XM-18 skinny no choil on DLT... They were cleaned in a day or two as usual...

A batch of Jurassic is on the way though.
 
4th Gen. Spanto M390 full titanium
 

Attachments

  • B578CC42-C4CE-49E4-93D3-C17E5C0CFB1B.jpeg
    B578CC42-C4CE-49E4-93D3-C17E5C0CFB1B.jpeg
    335.1 KB · Views: 8
  • F1D5EC68-1448-40E8-BDE2-0C6EF0C729FF.jpeg
    F1D5EC68-1448-40E8-BDE2-0C6EF0C729FF.jpeg
    374.6 KB · Views: 7
Gen6, regular thickness, I think DLT did Spanto, Slicer, and Wharncliffe. All three in M390 (DLT tell-tale).
 
Time to visit the "Knives Wanted" section of the Exchange.
 
Status
Not open for further replies.
Back
Top