How to avoid Khukuri Mishaps!!!

Joined
Oct 28, 2000
Messages
1,077
Here are the Keys to Khukuri Safety:

1. A khukuri is a sharp blade. Treat it with respect always. No exceptions.

2. Know how to handle a khukuri properly. Know your target and make sure that if you miss, the blade goes out of harm's way. No thigh tappers, knee cappers, shin splitters, toe loppers or splitting headaches then.... See picture below for example:

ouch.jpg


3. Be sure others who may handle your khukuris, do so in a safe manner. If any doubt exists, do not let them handle it. After all, what responsible khukuri owner would give a sharp knife to an idiot?

4. In sheathing and unsheathing a khukuri(or for that matter, any sharp blade), always keep the sharp edge away from your fingers. Also make sure that you do not poke the blade through the scabbard and slice your hand resting on the back of the scabbard. See the pictures below on how to do this properly.

pict2.jpg


pict3.jpg


And the below pictures show WHY you should do it the right way.

cutbands02.jpg


cutbands01.jpg


5. Do not handle or use your khukuris if you are in no condition to do so.

6. If the khukuri is loose in its scabbard, fix it. Nothing is more embarrassing than having to explain how a 15 inch khukuri wound up stabbing your foot to the medical personnel.

7. Keep these safety keys in mind always.

Also remember that the above demonstrations were performed by safety conscious professionals to demonstrate certain hazards and many of the precautions taken by them are not obvious to the untutored eye. In other words: "DON'T TRY THIS AT HOME, KIDS"!!!

If anyone else has any further suggestions for improvement, please add your reply to this thread and I will update the "Keys to Khukuri Safety."

Credits for the above go to Uncle Bill, Tom Marker, Howard Wallace's Khukuri FAQ and the many HI khukuri knuts out there for their contributions.

Thank you.
------------------
Harry
HI Khukuri Range Safety Officer

[This message has been edited by Apothecary (edited 12-03-2000).]
 
Amen, let's keep all our digits as long as we can so we don't have to have the kamis change khuk design for those of us with "varying grip size"
wink.gif
if you know what I mean. My apologies, I shouldn't post after X-number of martinis!
smile.gif

BTW, I did read #5 above and am no where near my khuks(or guns) at the present time
smile.gif


Rob

[This message has been edited by MauiRob (edited 12-03-2000).]
 
Will, good point (pardon the pun) about the sharp chape. One thing is to remove the chape as outlined in other recent threads or take a file and round the tip off or remove the chape and create a new one that is blunt tipped( seems to me that this would not be impossible for the BirGorka kamis to do).

Harry
 
Back
Top