I Think I Fudged Up...

D1omedes

D1omedes

Joined
May 3, 2009
Messages
1,125
Hey all. I went ahead and ordered a Tek Lok because I wanted a convenient way to carry my Izula. Problem is, I assumed a Mini Tek Lok would be just fine. I just received it this morning and it doesn't look like it can fit the standard Izula sheath at all. :(

Do any of you Izula owners use a Tek Lok for carry? If so, is it a Mini or a Large Tek Lok? Thanks.
 
D1omedes said:
Hey all. I went ahead and ordered a Tek Lok because I wanted a convenient way to carry my Izula. Problem is, I assumed a Mini Tek Lok would be just fine. I just received it this morning and it doesn't look like it can fit the standard Izula sheath at all. :(

Do any of you Izula owners use a Tek Lok for carry? If so, is it a Mini or a Large Tek Lok? Thanks.
Click to expand...

Are you sure two screws won't fit? I don't have any in front of me but I thought it would work, you just can't adjust to very many angle choices.
 
I used a large one (I had it on another sheath I never use) and it worked great.

It was a little tricky to get the holes to line up right, but it worked. :thumbup:
 
Yea Bro, your toast.

You need a large tec-lok.

As was said though, you'll find a use for it.

The new large tec-loks are shweet though if it makes you feel any better.
 
I used a small one on my Izula rig. I used the female (internal threads) thru the slot in the Izula sheath, and the male (external threads) thru the tek-lok with no rubber spacers. Worked just fine. I'll see if I can dig up some pics.

picture008tt.jpg



I did have some longer Chicago screws laying around and I think that is what I used for the small tek-lok but I am not 100% positive.
 
Last edited:
Snakedoc said:
I used a small one on my Izula rig. I used the female (internal threads) thru the slot in the Izula sheath, and the male (external threads) thru the tek-lok with no rubber spacers. Worked just fine. I'll see if I can dig up some pics.


I did have some longer Chicago screws laying around and I think that is what I used for the small tek-lok but I am not 100% positive.
Click to expand...

Yep, same here! :D Thanks, Snakedoc. :thumbup:

BTW, I'm not sure how you could possibly fit the spacers in without longer screws. Is that an inherent design problem or just the thickness of the Izula sheath?

I would have gotten a larger Tek Lok but this one fits my belt perfectly. Again, if I need another one in the future it's only $15 or so. Thanks for the help everyone.
 
You're welcome!

Just the design of the Izula sheath. They are quit versitile and sturdy!!
 
Let me look. I may have a large that I'll trade out with you. Should just cost us both some minimal shipping.

Oops... just read the rest of the thread. Glad you got it figured out. :thumbup:
 
Does anyone have a pic of this setup on a belt or on your hip? I have very interested in seeing this setup!

***edit*** found pics in another thread!
 
Last edited:
You must log in or register to reply here.
Back
Top