If you could....

svrider3

svrider3

Joined
Jul 14, 2007
Messages
2,837
Have Kershaw build you a knife to your specs using models that have already
been available are soon to be. What would you ask for?

I'd take a PE Random Task with Ti scales anodized something like the purple/black smoked Leek and a 13C26/ZDP composite blade. :thumbup:
Oh, and a black Ti clip. ;)


I'd give $200 +/-
 
Spec Bump with red Titanium Liners, VG10 Blade, Silver G10 scales, Black DLC Blade. I think it would look like the Ferrari of Kershaws.

Oh I forgot to add Please...Please, Please, Please.

I would be willing to pay between $150 and $200 for such a fine looking blade. I'd probably buy 2.
 
Full-sized satin PE Cyclone, with black G-10 scales over thick dual stainless liners, drilled & tapped for tip-up, left-hand carry. Also, stretch the blade out to 3 & 15/16ths inches long. THAT is my dream folder.:thumbup:.:thumbup:.
 
JYD II with SG2 laminated blade, Ti framelock, G-10 scale side, flat thumb ramp, and thumbstud with scalloped G-10 for access.
 
glockman99 said:
Full-sized satin PE Cyclone, with black G-10 scales over thick dual stainless liners, drilled & tapped for tip-up, left-hand carry. Also, stretch the blade out to 3 & 15/16ths inches long. THAT is my dream folder.:thumbup:.:thumbup:.
Click to expand...

Dont forget a zdp blade ! ;)
 
i want these:

Offset with MIM blade in VG-10, high polish finish. stud lock, ti handles anondized to a red, with a carbonfiber back spacer and ti liners. speedsafe of course.

Lahar with VG-10 still, only major change would be blue or red scales in g-10, same grippyness though.
 
hmmmm... I was just thinking about a spec bump with a satin ZDP blade, and textured titanium handle slabs. But they already answered my wish for the Ti JYDII. I'd also like to see a knife come with OnStar and perhaps a beverage holder ;)
 
Quote:
Originally Posted by glockman99
Full-sized satin PE Cyclone, with black G-10 scales over thick dual stainless liners, drilled & tapped for tip-up, left-hand carry. Also, stretch the blade out to 3 & 15/16ths inches long. THAT is my dream folder...

dmonay said:
Dont forget a zdp blade ! ;)
Click to expand...
Actually, I'm one of those weirdos who doesn't see anything wrong with the 13C26 steel that the current Cyclone blade is made of. I've grown pretty fond of that steel.
 
im with glockman on the tip-up left hand carry (although i keep em on my right side, tip up left hand allows a nice comfortable retrieval).

i recently went back to EDCing my 1800 Mini Mojo and i have to say i am extremely fond of that little safety on the flipper. you get so much engineering in such a small package i would like to a larger implementation something like a cyclone/speed bump hybrid with Ti handle with the scalloped G10 insert like the Mojo same stud lock but something like a 3inch SG2 blade fashioned out of a scaled down bump recurve with the on/off switch to avoid some sheeple scaredness :D

oh and drilled as mentioned above. and in smoked anodization for the Ti portion of the handles......
 
Damascus Shallot with Black Boron Coated handle. Highly Polished screw heads, and a high-polish capped pivot screw like the KO Customs. And a polished pocket clip.

If Damascus is unavailable, then I would like a Boron Coated S30V Shallot blade
 
Ok...now that you have your dream knife, edit and put in what you would be willing to pay.
 
Full sized Cyclone, Studlock, Composite ZDP-189/13C26 blade.

Make the handle scales 3-D machined and anodized like the Ti bump for a little extra "bling".
Do the same with the blade (I don't know if it's possible) and it would be one of the most beautiful knives ever made, not to mention it would have a nice digital convex grind.
(Edit)
$130 with regular aluminum handle scales and regular blade grind.
$175 with fancy handle and blade.
 
A Mini Mojito, except instead of a 2.5" blade, make that 3.5", and either S30V or ZDP189. What would I pay? $ 100 or so...
 
A slightly smaller ET (75 - 85% of the actual size), with CF handles instead of aluminium.
 
The Groove blade shape and flipper minus the grooves, S-30V, a 3 and 4 inch version made if possible. If I had a choice, I'd go with the 3 for legal reasons. Full G-10 scales EXCEPT for the area directly beneath and immediately surrounding the clip.
 
As an addition to my other post in this thread, I'd also like to see Kershaw come out with a "Mini" ZT 0200, with a blade of 2 & 7/8ths inches long (to please the "under 3" blade laws"), and a "Mega" ZT 0200, with a 5 & 3/4 inch long blade (for those times when you want to "reach out & touch someone").

Oh, and I'd also like to see something along the lines of a "LAWKS." on all Kershaw/ZT liner-lock folders. (That's a little lever that's activated to lock the liner-lock so it can't accidently be moved off)...This is used on some of the CRKT folders.
 
You must log in or register to reply here.
Back
Top