Indian George, forge construction

[John Frankl]

I.G.,
Good talking with you today. Please email me the info we discussed to seoulbjj@hotmail.com. Could you also give me info on your quick release fittings? I want to run multiple items off of a single regulator. Also, ask Jerry to email me about kaowool. Thanks,

John

 

[indian george]

Forge Parts

Blower Part # 16-1032 $18.99
Vendor Surplus Center
Phone Number 800-488-3407

Black Pipe

1.5 inch
Nipples
6” & 4”
90 deg. Elbow
Coupling ( must grind the edge off so the blower will side over it)
¼ NPT nipple 6”
¼ NPT cap ( DRILL 1/8" HOLE IN CAP)
2 sets of ¼ NPT quick disconnects with o-rings
8’ of hose

MSC (800) 645-7270

Page # Item # Description $$$$

3341 8557803 Nuline Regulator $20.89

4030 00075929 Needle Valve Female $20.32
(1/4 NPT )
MSC also has the ball valves. I put in a valve before the manifold. One after each male quick connect going into the female on the manifold. That way I can run any of forges or stove I want to in any combination.
The manifold is from Nothern it is the bar one with four outlets.
John, I run regulators one for each unit. You can use one between ball valve and manifold.
Picture of forge http://community.webshots.com/photo/28892858/29072312zryaqbcWdx
Best Of Luck, to you and your in your new location