Infamous Blades custom knives

Infamous.blades

Infamous.blades

Joined
Oct 4, 2014
Messages
76
I would like to present the work Infamous Blades (two of us)
hence teamwork.
We are focused on stainless steel PM and to that end we develop our skills
tempering we want maximum quality that we can provide.
This is the first model of the knife which we want to present.
Both in Elmax (sub-zero) 60HRC
The dimensions of smaller model are:
overall length - 215mm - 8 15/32in
blade length - 100mm - 3 15/16in
thickness - 4.6mm - 3/16in
pins - cunifer / copper
The dimensions of larger model are:
overall length - 228mm - 8 31/32in
blade length - 110mm - 4 21/64in
thickness - 4.6mm - 3/16in
cunifer / copper

2954pdf.jpg


2qnzi1y.jpg


de8fsy.jpg


2vnnp1j.jpg


34nfw9l.jpg


2d0ifxz.jpg


c0qoh.jpg


b5fudx.jpg


syugdl.jpg


1zn046w.jpg


30d9g21.jpg


9qijc1.jpg


14wuc9i.jpg


208jjmg.jpg


Larger model produced in M390 61HRC

243p6z5.jpg


2wn2vly.jpg


ta291f.jpg
 
Last edited:
I find some similitude with one by Dmitry Sinkevich's, the blade and handle shape will make a real fine using knife, also pleasing to look at :) Nice sheats too!
 
Many thanks guys for your good comments, stezann you have right that is Sinkevich but first idea I got from my cheap kitchen knife (handle) than I start to look some same shapes
30l00gz.jpg

And I also sorry for my Tarzan english :D my buddy and I are proud to be Croatian.
Don you have also right Ken have some similar skinner model and idea was semiskinner blade and more ergonomic utility knife for wide purpose.
That is first batch in elmax and sub zero treatment next we use real cryo heat treatment for all stainless powder steel .
 
Last edited:
Some personal knives :D
Up - CPM S35VN 62,6HRC cryo ,carbon handle is from these super electric car by Rimac

1z6fm8x.jpg


2lnh5jr.jpg

Down _ my little buddy in M390 61 HRC small scrap work :thumbup:
[video=youtube;hVKXq4W-7Hw]https://www.youtube.com/watch?v=hVKXq4W-7Hw[/video]
have accident
vxdrfk.jpg


1zlenmc.jpg
 
nice thread :)
 
:cool: These carbon is applied just for that CPM-S35VN knife , otherwise is not too good for handle job , different thickness and lots of holes...fun only :) and good story

meanwhile on table is next batch waiting heat treat with cryo, some elmax,D2 and K390

2jcip1k.jpg


and some great pins waiting these knives

2wd0q6s.jpg


:thumbup:
 
:) and another of my personal favorite knives in M390 steel, every piece of these model is named Baja ( in my area that means cool guy) and prefix letter is mark of the steel.
M'Baja - handle is made from old chunk Lignum Vitae who is founded in shipyard for old wooden boats and closed long period.
Blue spacers and copper/cunifer pins ....
1055s0y.jpg

after year intensively use wood have nice patina , pins too but on that photo I was clean it.
few months before
4kupfm.jpg

and new born made
2a7bitx.jpg
 
Last edited:
You must log in or register to reply here.
Back
Top