Just a Hot Drink (Cookset Setup)

Guyon

Biscuit Whisperer
Super Mod
Joined
Mar 15, 2000
Messages
45,835
I've been putting together a little pocket carry set for days when I do a quick 3-5 mile day hike in some of the nearby parks.
As the weather is getting colder, sometimes it's nice to stop and partake of a hot beverage, be it coffee, tea, or hot chocolate.
I wanted something light and compact that could just be tucked into a jacket pocket. Here's what I've come up with.

The kit consists of a Snow Peak single wall 300 mL cup, a Snow Peak 300 mL lid, the Gram Weenie stove, a 1 oz fuel bottle, mini Bic lighter, heat shield for bottom of stove, aluminum cover for top of cup. I keep the little parts in the cup with a plastic lid (no idea what it came off of). I also have a bandanna and the Snow Peak mesh bag (shown below). I still need to add a small wind screen.

P1030687.jpg


Here's the little Gram Weenie in action. The flame diameter is just right for the cup, and the thin aluminum cover (made from flashing) keeps the heat in. No need to check on the water; I just let it go till the stove runs out of fuel. With 1/2 ounce of fuel, burn time is about 7 minutes, and it will just start to bring 10 ounces of cold water to boil. By "just," I mean bubbles just start to form on the bottom of the cup. Since I carry my own water hiking, it's clean/treated, and I'm not worried about a big rolling boil with this setup. I just want it hot enough to steep tea or melt instant cocoa or coffee. For these jobs, the Gram Weenie does great.

P1030683.jpg


Making some green tea... My aunt and uncle are beekeepers and sell honey straws like the one below. Great way to add a quick bit of flavor to tea, and super easy to carry.

P1030685.jpg


Though most sites only mention the Snow Peak lid in conjunction with the double wall mugs, mine works just fine with the single wall version. Good tight seal.

P1030686.jpg


Packing it all up. Small stuff in the mug.

P1030688.jpg


I put on the clear lid and stack the aluminum cook cover and Snow Peak lid on top. Everything rolls up in a bandanna/pot holder.

P1030691.jpg


And goes into the mesh sack.

P1030692.jpg


Like I said, I still need to add a small windscreen that can ride inside the cup along with the other small items. This kit should be one that I enjoy on a lot of day hikes this fall and winter.
 
Very compact and nice looking kit Guyon!
I like the idea of having something tiny that
I would actually have no problems sticking in a pocket.
Right now its always a debate... "Do I wanna carry that
pouch with the stove and cookwear...nah,I'll just be gone 2 hours"
where your kit seems to make the decision much much easier.

I ordered a new wood stove that I will see if I can
build a small kit around.
 
oh
that lid for the titanium cup,
is it a "sipping" lid?
I need to find a way to stop the burned lips syndrome! :)
 
Did you buy that aluminum lid for your mug? It looks like something you made or improvised from something else. Same with the heat shield. Great idea for a small setup.
 
Very compact and nice looking kit Guyon!

It is nice and small. I realized that last pic didn't really show any sense of scale, so here's the kit in hand.

P1030693.jpg


gram wennie new to me,got a link?
thanx.

The maker is George Carr, and here's his site: http://end2endtrailsupply.com/The_Gram_Weenie_Stove.html

Did you buy that aluminum lid for your mug? It looks like something you made or improvised from something else. Same with the heat shield. Great idea for a small setup.

I cut it out of a piece of roof flashing with scissors. The heat shield came with the Gram Weenie.
 
oh
that lid for the titanium cup,
is it a "sipping" lid?
I need to find a way to stop the burned lips syndrome! :)

If you're careful, yeah, you can sip without putting your lips on the hot metal.
Since it's a single wall mug, it doesn't really insulate very well, and conversely, it transmits heat.
But on the plus side, you can heat/cook in a single wall. Snow Peak advises you DON'T put a double wall mug over flame.
I don't know what kind of mug you're using but you might check out the Snow Peak Hot Lips.
They clip over the edge of the mug and mute the heat from the cup.

http://www.snowpeak.com/hotlips-2-piece-set-mgh-001.html

MGH-001.jpg
hotlips-via.jpg
 
Cool! This would be a great set-up for the fishing I plan on doing this weekend.
 
Oh just to add, my wife looked at this thread a little while ago and said that the clear lid came off of some sort of baby food she bought at Target.
I tried a bunch of lids from some of our kids' cups, but they were all just a little bit too big.
Rumbling around in our Tupperware/plastic bowl drawer, I found the above lid which fits the 300 mL mug perfectly.
 
Great set-up. Thanks for posting. I will be working on a similar setup. Love this cold weather
 
Guyon,

Thanks for sharing. I've been thinking about a similar kind of kit for a while. May have to take a look at it again and borrow some ideas. Nothing like a hot drink on a cold day.


God bless,
Adam
 
very cool setup.. how much you reckon you spent on this?

Ti mug was $22.50 shipped. Gram Weenie was $12 and a little more for shipping (I ordered some other stuff from George). Snow Peak lid, about $6. Fuel bottle, maybe 50 cents. Bandanna was $2. Bic lighter, under a buck. All told... around $45. The titanium mug was the biggest expense, of course. Aluminum or steel would be a lot cheaper.
 
Ti mug was $22.50 shipped. Gram Weenie was $12 and a little more for shipping (I ordered some other stuff from George). Snow Peak lid, about $6. Fuel bottle, maybe 50 cents. Bandanna was $2. Bic lighter, under a buck. All told... around $45. The titanium mug was the biggest expense, of course. Aluminum or steel would be a lot cheaper.

still not bad considering how many times you could possibly use this in the future. its very compact and light. hard to beat bud
 
That setup looks great! I just had a conversation with a friend about setting up something just like this for shorter day hikes (6-10miles) and you gave me some wonderful ideas. Thanks!

Maybe this could be a challenge for others? See who can come up with similar kits???
 
looks good :)

I went a slightly different route- went w/ a 450 ml cup, allows me to drink AND boil enough water to reconstitute a freeze dried meal (single serving) or soup

for a stove I use a Ti Esbit wing stove , diy Ti winscreen - the windscreen doubles as a wood stove w/ the addition of two small stakes (which are carried to help setup a poncho/tarp), small spork, mini bic and a couple of esbit tabs- weight is under 5 oz for the whole setup

kitchen.jpg


coffeebrewing.jpg
 
Thermos (Nissan) makes flip top stainless steel vacuum bottles (no cup). You sip off a lip, so hot beverages can be consumed. A spout would only be good for cold beverages. These bottles have a wide mouth, so they are easy to clean and can hold ice cubes or soup. They come in 2 sizes and seem to be marketed mainly in Japan. The small size is 350ml (11.8oz), and the large size is 500ml (16.9oz). The small size weighs 231gm (8.1oz), and the large size weighs 257gm (9.1oz). The neat thing is, these bottles can be used all year for hot and cold beverages. They work at home as well as on the trail. They come in 4 colors (red, white, brown, and gray) but the paint is over stainless steel, so paint deteriorization will not affect the performance of the bottle. If you punch up 350 thermos or 500 thermos on eBay, you can get details.
 
it will just start to bring 10 ounces of cold water to boil. By "just," I mean bubbles just start to form on the bottom of the cup.

I want to revise this statement. On my first couple of test runs, I did just barely get a boil.
Last couple of tests, however, I easily got a sustained rolling boil like this one...

P1030696.jpg


What'd I do differently? I dripped a little bit of fuel around the base of the stove and lit that "spilled" fuel.
Effectively, I turned the heat shield into a priming pan. The side jets bloomed a LOT more quickly, and I got a longer burn time as a result.
Longer burn time means better chance of a good boil.

I was using chilled water on all these runs, but I have not yet tested the stove outside.
Once I get a wind screen for the stove, I'll do some tests out in the cold night air.
I'm also going to improve my little aluminum cover with a short handle (aluminum screw post) and a steam hole or three.
 
Back
Top