Laguna Lace agate Slip Joint

[SVanderkolff]

 

[milesofalaska]

Very nice. Not much information. Working 'rock' is a challenge. As a knifemaker, curious how this was done. Very fine finished product!

 

[SVanderkolff]

The knife is a slip joint 4 1/4” closed 7 1/2” open. The blade and back spine are 154CPM .
I cut the slab of laguna lace from a rough block and then cut and ground the slab to fit. I use diamond saws and wheels to work the stone. Then polish with diamond paste to 4500 grit.
Thanks for asking.
Steve

 

[tinfoil hat timmy]

That's a ton of high precision work. Nicely done

 

[SVanderkolff]

Thank you