- Joined
- Feb 28, 2012
- Messages
- 471
I take PayPal. All sales US only. First to say "I will take it." gets it. Tons of Pics posted in follow up posts below! I will take offers on some of these or as package deals but low ball offers will be ignored.
The only trades I am interested in are for Titanium Frame Locks. Not interested in any other type of trade...
1) Benchmade 810 Contego: $OLD - Verminous
2) Kershaw Composite Leek: $OLD - Ezoption
3) Kershaw S30V Blur. $OLD - JWebUS
4) Ontario Utilitac II Tanto. LNIB. This is by far the smoothest knife I've felt in this price range. Smoother than some I own that cost 5-10 times as much. Has cut paper once to test the edge which is sharp. Excellent lock up and no blade play.
Blade Length: 3 1/2"
Overall Length: 8"
Closed Length: 4 1/2"
Pocket Clip: 4 way, tip-up / tip-down carry
Locking Mechanism: Linerlock
Steel Material: AUS8 Stainless Steel
Asking $39.00 Shipped
5) Enlan EL-02B. LNIB. I picked this up in a package deal. Looks brand new. Have only opened and closed a few times. Feels really solid and I love the Sebenza "like" stonewashed bladeshape as well. There is some slight blade play though. Might be resolved via tightening but I don't have a tool (or time to make one) that will tighten the pivot to adjust.
LOCKING MECHANISM Axis Lock
BLADE STYLE & OPENER Drop Point, Ambidextrous Thumb-Studs
BLADE STEEL 8Cr13MoV Stainless Steel (56-58HRC)
HANDEL SPEC Dual Stainless Steel Liner, G10 Handle Scales, Lanyard Hole
BLADE LENGTH 3.28"
OPEN 8.31"
CLOSE 4.72"
WEIGHT 135g
Asking $19.00 Shipped
6) Spyderco Stainless Rescue Jr. Serrated. Used but Good Condition. I've had this for some time and have kept it in a drawer the last several years. As you can guess with the stainless handles, there are superficial scratches (not deep or any gouges). In the pics below, I tried to angle the camera so that every flaw was exaggerated. I do not think I ever sharpened this one, though it could have had a few passes on the Spyderco Sharpmaker. Can't say for sure but I am disclosing that anyway. Solid lockup and almost no perceptible side to side blade play, though there is a very, very, very slight amount. Typical spyderco.
Blade Material: ATS-55
Asking $60.00 Shipped OBO (Taking best offer here since I have no idea what they should go for. Listing it for less than what I paid for it 10 years ago.)
7) Spyderco Large Dyad (C44) with Micarta Handles. Used but in Good shape. I've had this one in a drawer as well bud did carry it exclusively for a while. I've tried to capture any issues in the images below. Here are all the issues I am aware of:
1) The slightest part of the tip on the plain edge is missing and barely noticeable but needs to be mentioned. Can be easilly replaced via sharpening. I will do this on my Wicked edge with the existing bevel if you want.
2) There is a small chip at the top of the serrated edge that can be easilly removed via sharpening.
3) There is a rub mark in the micarta handle (pic below) on the bottom edge.
4) There are some small and barely noticeable spots in one area on one of the blades.
5) Typical wear on the pocket clip.
Specifics:
Model Name: Dyad
Model Reference: C44
Designer: Sal Glesser
Blade Length: 3 3/8? (PE), 3 3/4? (SE)
Closed Length: 4 5/8?
Overall Length: 8? (PE), 8 3/8? (SE)
Weight: 4.375oz
Blade Material: ATS-55
Blade Finish: Satin Finish
Blade Grind: Full Flat (PE), Hollow Ground (SE)
Handle Material: Micarta
Locking Mechanism: Lock Back
Years Produced: 2000-2001
Manufacture Location: Seki-City Japan
Asking $150.00 Shipped OBO (Taking best offer here since I have no idea what they should go for. Listing it for what less that what I paid for it 10 years ago.)
8) Remington (Italian Made) Elite Skinner I. Has never been used. Comes with leather sheath that has metal belt clip. Has a swedge in the top of the blade near the tip. Very, very comfortable in the hand. Has a lanyard slot in the base of the tang (full tang construction.)
Blade Length: 3"
Overall Length: 8"
Spine Thickness: 3.8 mm
Blade Material: 440C Stainless Steel with Satin Finish
Handle Material: G-10
Includes black leather sheath
Made in Italy
Asking $85.00 Shipped.
The only trades I am interested in are for Titanium Frame Locks. Not interested in any other type of trade...
1) Benchmade 810 Contego: $OLD - Verminous
2) Kershaw Composite Leek: $OLD - Ezoption
3) Kershaw S30V Blur. $OLD - JWebUS
4) Ontario Utilitac II Tanto. LNIB. This is by far the smoothest knife I've felt in this price range. Smoother than some I own that cost 5-10 times as much. Has cut paper once to test the edge which is sharp. Excellent lock up and no blade play.
Blade Length: 3 1/2"
Overall Length: 8"
Closed Length: 4 1/2"
Pocket Clip: 4 way, tip-up / tip-down carry
Locking Mechanism: Linerlock
Steel Material: AUS8 Stainless Steel
Asking $39.00 Shipped
5) Enlan EL-02B. LNIB. I picked this up in a package deal. Looks brand new. Have only opened and closed a few times. Feels really solid and I love the Sebenza "like" stonewashed bladeshape as well. There is some slight blade play though. Might be resolved via tightening but I don't have a tool (or time to make one) that will tighten the pivot to adjust.
LOCKING MECHANISM Axis Lock
BLADE STYLE & OPENER Drop Point, Ambidextrous Thumb-Studs
BLADE STEEL 8Cr13MoV Stainless Steel (56-58HRC)
HANDEL SPEC Dual Stainless Steel Liner, G10 Handle Scales, Lanyard Hole
BLADE LENGTH 3.28"
OPEN 8.31"
CLOSE 4.72"
WEIGHT 135g
Asking $19.00 Shipped
6) Spyderco Stainless Rescue Jr. Serrated. Used but Good Condition. I've had this for some time and have kept it in a drawer the last several years. As you can guess with the stainless handles, there are superficial scratches (not deep or any gouges). In the pics below, I tried to angle the camera so that every flaw was exaggerated. I do not think I ever sharpened this one, though it could have had a few passes on the Spyderco Sharpmaker. Can't say for sure but I am disclosing that anyway. Solid lockup and almost no perceptible side to side blade play, though there is a very, very, very slight amount. Typical spyderco.
Blade Material: ATS-55
Asking $60.00 Shipped OBO (Taking best offer here since I have no idea what they should go for. Listing it for less than what I paid for it 10 years ago.)
7) Spyderco Large Dyad (C44) with Micarta Handles. Used but in Good shape. I've had this one in a drawer as well bud did carry it exclusively for a while. I've tried to capture any issues in the images below. Here are all the issues I am aware of:
1) The slightest part of the tip on the plain edge is missing and barely noticeable but needs to be mentioned. Can be easilly replaced via sharpening. I will do this on my Wicked edge with the existing bevel if you want.
2) There is a small chip at the top of the serrated edge that can be easilly removed via sharpening.
3) There is a rub mark in the micarta handle (pic below) on the bottom edge.
4) There are some small and barely noticeable spots in one area on one of the blades.
5) Typical wear on the pocket clip.
Specifics:
Model Name: Dyad
Model Reference: C44
Designer: Sal Glesser
Blade Length: 3 3/8? (PE), 3 3/4? (SE)
Closed Length: 4 5/8?
Overall Length: 8? (PE), 8 3/8? (SE)
Weight: 4.375oz
Blade Material: ATS-55
Blade Finish: Satin Finish
Blade Grind: Full Flat (PE), Hollow Ground (SE)
Handle Material: Micarta
Locking Mechanism: Lock Back
Years Produced: 2000-2001
Manufacture Location: Seki-City Japan
Asking $150.00 Shipped OBO (Taking best offer here since I have no idea what they should go for. Listing it for what less that what I paid for it 10 years ago.)
8) Remington (Italian Made) Elite Skinner I. Has never been used. Comes with leather sheath that has metal belt clip. Has a swedge in the top of the blade near the tip. Very, very comfortable in the hand. Has a lanyard slot in the base of the tang (full tang construction.)
Blade Length: 3"
Overall Length: 8"
Spine Thickness: 3.8 mm
Blade Material: 440C Stainless Steel with Satin Finish
Handle Material: G-10
Includes black leather sheath
Made in Italy
Asking $85.00 Shipped.
Last edited:
