Lone Wolf Harsey T2 Folder

[bluball57]

I just recently purchased a new Lone wolf Harsey T2 folder. When I first opened the blade it was slightly tight so I loosened the pivot screw a little. Now I have the problem of the blade not seating centered of the liners. Also, when I close the blade it slightly rubs sometimes. The blade opens easily now but it is still not centered when closed. When adjusting the pivot screw there's actually one on each side and you have to use two torx wrenches or one side will turn when you adjust the other side. Can anyone tell me how to correct the blade positioning or should I send it to Lone Wolf and let them readjust the knife?
Thanks....

 

[Jason B.]

Very, Very slight adjustment is all that's needed and sometimes it takes a minute to get it right. Your knife should open easily no so easily that it makes everything else loose. Usually a knife needs to wear in before it will become smooth about 200 or 300 openings usually does it.

 

[houtex]

Of the few knives I own that I have had that problem with I've learned to add a small drop of nano lube before adjusting any screws.
As far as fixing the centering ,I once used folded business cards to center the closed blade and then tighten the pivot,it may help. Good luck.