Looking for Broken Skull washers

[jux t]

I crimped a nylon washer in my Broken Skull and am looking to replace the nylon/PB washers with one pair of PB.

For those who don’t know, I’ve read from I insta9ves that these come with two .196x.5x.004 nylon washers and two .196x.5x.006 phosphor bronze washers.

This is a long shot, but I’m looking for any info on a replacement set of washers, preferably .196x.5x.01 washers to make up for the nylon thickness. Any help is appreciated.

That’s .196 inner diameter, .5 outer diameter, .01 thickness. I would be fine with any PB/nylon/nylatron washers, so long as they fit the inner diameter and thickness. Outer diameter can go a bit wider. Having a hard time sourcing these.

 

[Blue Sky]

I think you need .010 thick washers, not .10 or .1 Bit of a typo there.

 

[jux t]

I think you need .010 thick washers, not .10 or .1 Bit of a typo there.

Whoops, you’re right I’ll edit it.

 

[115Italian]

I’ve removed the nylon washers on several cold steel knives and just ran the pb with no issue.

 

[hermit dave]

knifekits.com

 

[jux t]

knifekits.com

Haven’t found anything close enough in size there, unless I missed it.

 

[ricklikesknives]

USA knife maker dot com. Maybe?

 

[jux t]

USA knife maker dot com. Maybe?

Looked there as well. I think maybe there’s no source for these unless there’s a custom order. Did find one place, but I’d have to custom order a large quantity for close to $100, and that’s not happening.

I’ll give this a try: S Shaun Cazin and W Wallace Edged Tools and D DemkoKnives

 

[Vlade]

I’ve removed the nylon washers on several cold steel knives and just ran the pb with no issue.

I did that on one of my Cold steel knives and now the blade will not center and scratching on the scales. Maybe you had better luck than me cuz it didn't work.

 

[hermit dave]

Try KNIFIUS on Amazon