Make your own stove in minutes. Extremely light.

Joined
Aug 10, 2013
Messages
8,038
11.32 grains = 0.026 ounces

Stove%2520BoM.JPG

Stove%2520Fuel%2520Chamber.JPG

Stove%2520parts.JPG

Stove%2520Assy.JPG

Stove%2520Asmbld.JPG

Stove%2520Weight.JPG

Stove%2520afire.JPG
 
Last edited:
What is the circumference and height of the center well piece? Also did you seal the three pieces together and if so what glue-media did you use? Nice job!!!!
 
Hi Quirt -

The cylinder piece is leafed-together with slits - shown in this picture

picture


Cool idea - What kind of fuel is used?

best

mqqn
 
Ah yes a soda can alcohol stove. They are very similar to the trangia alcohol burners you can purchase commercially and offer cheap no fuss cooking on the trail. A nice step up in convenience from wood stoves without the cost of gas. There are videos on youtube for anyone who wants to dig deeper.
 
No glue. The aluminum duct tap not required either --- I did that for aesthetics. The top or bottom is deeper than the other so one slips into the other. The height of the center piece just can't be so high as it prevents bottom or top from slipping inside the other.
 
Back
Top