Memories of old friends- Kancha Kami Sherpa Style Khukuri

Status
Not open for further replies.

Karda

BANNED
Joined
Jun 1, 2007
Messages
22,470
Reminiscing about days gone past are sometimes triggered by the simplest things.
We have a customer inquiring about the old Kancha kami design sherpa style khukuri that he made for us many years ago.

Yangdu asked me to post this to see how many of you all might be interested in purchasing one of these fine khukuri if she has a run of them made.
As Kami Sher (the Tiger) has crafted these fine knives before, he will again make them to add to your collections.
We are still trying to get the old orders filled and have yet to figure out the lengths and weights for these, so it will be a little while.
If any of you older members have one of these, please pm or email me with the specifics and possibly a picture of it too.


Please express your interest here in this thread so that she has a good idea of how many should be made.



The Legend of Kancha Kami

Once in a while, a Himalayan knife-maker comes along and creates knives
of such beauty and usefulness that
he becomes a legend during his lifetime. One such knife maker was Kancha
Kami, who crafted knives for 60
years before he died in 1992.

He inherited his skill from his ancestral involvement with blacksmithing
and knife making for more than 400
years. During his lifetime, he lived within view of four of the world's
highest mountains, breathing pure air and
drinking clean water that flowed down from Mt. Everest and other
sky-high mountains. His life was simple and
he lived it in a traditional manner with few frills, quietly creating
Khukuris and farm tools.

The land he lived on, 30 miles southwest of Mt. Everest, was hostile and
full of rocks, but he managed to raise
enough crops to keep his growing family of five boys and two girls
well-fed. His fondest desire was to pass his
craftsman's skill on to his sons and, thereby, continuing the tradition
his ancestors founded over 400 years ago.

Part of the tradition he lived everyday, and believed in completely, was
that of his 5 sons joining him in his craft
as they grew old enough to become skilled knife-makers. That was not to
happen. His dream ended when all
of his sons decided to follow easier and better-paying jobs in the
tourist industry.

When I was growing up on my father's ranch, I spent almost every weekend
with Kancha Kami, sitting by the
fire and listening to him tell me stories while he sharpened the knives
from the ranch. He wasn't just a great
knifemaker, but a great storyteller, too, with a sense of humor. I can
still hear him laugh when I think of him.

Whenever someone asked who wanted to go to Kancha Kami's Aaran (his shop)
to get the knives sharpened, I
was always ready to be the one. I believe my father and the sherpas who
worked on the ranch knew that and
only asked to tease me. They would smile at the sight of me jumping up
and down, saying, "I do! I do!" When
they picked me, I would gather up the knives and scurry off to Kancha
Kami's Aaran and a new story.

The only trace to be found today of Kancha Kami's craftsmanship is the
model Himalayan Imports made of his
famed Sherpa knife. Our Kamis have been busy creating exact replicas for
your collections.

An original Kancha kami Sherpa khukuri:
Kancha-Kami-Sherpa-Style-kh.jpg


A replica from the last ones made:
a-2.jpg


Kancha Kami:
k-2.jpg
 
Last edited:
I was just looking at this one tonight in the "lost pages" catalog... I am in for one.
 
If I can put the loot together all at once put me down for one for sure. It's beautiful and oozes history to me. I'd love to have one.
 
I was just looking at this also on the old cafalogue.

I would be very much interested in one. Still need to get a blade by Sher!
 
Here are two more pictures of the Sher replica posted by Karda above. It's a big, heavy knife: 18.5" OAL, 38 oz. It's not clear in the pictures, but the knife has wide, shallow fullers on both sides, which greatly enhance its chopping ability. The handle is horn and the brass keeper is massive. In the picture of the left side it looks like there are three pins, but those are just superficial discolorations in the horn. The handle is very comfortable.

View attachment 468617

View attachment 468618

I'm not certain that this is the exact knife pictured by Karda. The colors of the handle seem different, but that could be due to reflected light. If it's not the same one, it is at any rate a sibling.
 
Last edited:
I would love to have the opportunity to own one of these so please put me down as a yes. Like Bawannam and possibly others, I shall need to figure out finance issues for the purchase, but with all this lead time I can start saving a sheckle here and a sheckle there and by the time these are available I will be able to get one, heck the not eating might even be good for my cholesterol and blood sugar levels :D
 
I'd be down for one. Anything made by Sher or Kumar is good stuff in my book. If I remember correctly, Sher was really good at crafting a heavy knife that was well balanced with a good convex edge while Kumar really excelled in fantastic thinner edges.

Sher is a good fit for this knife, I think:)
 
put me on that pre order list-- was going to put it in my custom anyway after looking at the same thing as phil-- damn you phil and your good taste.
 
...have yet to figure out the lengths and weights for these...

Some searching shows these lengths and weights:

from 5-08-2009
Overall length --18''
Weight --34 oz
Spine thickness --1/2''
http://www.bladeforums.com/forums/showthread.php/643763-Early-Bird-Special-for-5-8-Pix-and-Kancha-Kami-s-Sherpa-Style-Villager-Khukuri

from 5-01-2009
Overall length --18''
Weight --35 oz
Spine thickness --1/2''
www.bladeforums.com/forums/showthread.php/641916-The-Legend-of-Kancha-Kami

from 5-20-2009
Overall length --18''
Weight -- 35 oz
Spine thickness --1/2''
and
Overall length --18 1/4''
Weight -- 38 oz
Spine thickness --1/2''
http://www.bladeforums.com/forums/showthread.php/646736-Weekend-Project-Knives-for-5-20

from 5-29-2009
Overall length --18''
Weight --23 oz
[is this weight a typo? Seems too light for a 1/2" spine]
Spine thickness 1/2''
http://www.bladeforums.com/forums/showthread.php/648817-HI-Give-Away-for-5-29
 
oooooh...18" and 38 oz, with 1/2" spine gets me excited. with the lead time for purchase i'll do one.
please put my name in the hat for one. thanks karda, does anyone have a buttcap shot to show the ornamentation of it?
 
Thanks for the Pics David!
and Thank you for looking up the old Specs Steve!
Having some pretty good eye strain today and am reading as little as possible.
 
Status
Not open for further replies.
Back
Top