Mini Nighthawk Finishes.

[TNRat]

I have been looking for a straight edged Mini Nighthawk with the OD handle and black finished blade.

I have not been able to find one, and suspect they may have never made the black finish with anything other than the 50/50 edge.

Has anyone had any experience with the stainless style finish on the Nighthawk and Mini Nighthawk? Is that finish prone to rusting?

How tough is the black finish? I am sure you still have the same rusting problem with the edge.

I am interested b/c this would be for EDC.

How well is the 420 steel holding up? How often is everyone having to resharpen these knives?

Thanks.

 

[guy g]

I'm not sure of previous models, but the current one is made mainly for Wal-Mart. The coating is partially for rust prevention,but mainly to reduce glare in critical situations. It will scratch fairly easily,but the knife is a user. 420HC is not to be confused with 420 steel which is inferior. Bucks heat treating makes the steel perfom at its best. If you are using the knife,rust is not a problem. Leaving it in a wet environment is. If you store the knife add a light coat of oil to the blade. 420HC is known for not rusting easily.
As to sharpening,it depends on your amount of use. Some will sharpen several times a week and some once a month or so.Hope this helps.
You may also want to look into the Buck Collectors Club.