- Joined
- Mar 26, 2009
- Messages
- 2,228
Working up a simplified (and easier to forge!) street barong, hopefully with the same flavor as the originals-heres the original design:
And a big one:
And here's the Minimalist, on paper and in differential hardened 5160 (also a big one):
And with a temporary 550 wrap to test the handling:
Final design will likely be a 5" blade, full height convex in 80CrV2. Also thinking about a little borderline-necker in S35VN...but have to work out HT for that and I'm not fond of the idea of sending out for HT...
And a big one:
And here's the Minimalist, on paper and in differential hardened 5160 (also a big one):
And with a temporary 550 wrap to test the handling:
Final design will likely be a 5" blade, full height convex in 80CrV2. Also thinking about a little borderline-necker in S35VN...but have to work out HT for that and I'm not fond of the idea of sending out for HT...