Moments of astonishment with your CRK

Joined
Aug 17, 2012
Messages
145
Anyone have any cool stories to tell from when you were super impressed with the performance of your CRK? Yesterday, we were carpeting my friends truck bed, and we had to precisely cut this thick, fibrous rubber for between the sheet metal and carpeting. We couldn't cut it with a razor-knife, scissors, dikes, or anything. I truly didn't think I could use my large sebenza to cut it either - because of the thickness of the blade - but i gave it a go anyway. It cut through it like butter, and I made about 30 cuts through this 3/4in fiber rubber sheeting. It is such a solid knife it truly felt like a fixed-blade. When all was set and done, I wiped down the blade, and it was still arm-shaving sharp! I was really impressed, and it feels great to really use a knife to some of its potential.
 
I stare at them on websites and just keep saying to myself one day you will be mine. Even tempted to sell most of my collection to get one.
 
You should definitely get one! I just got a Small Sebenza 21 last week. And I love it! Thoroughly impressed!!
 
Well I wouldn't call my story cool but I was definitely impressed by my Small Insingo quite a bit more than I normally am while hunting a few years ago.
I forgot my fixed blade at camp, first time ever, but had my trusty Insingo in my pocket as I always do cause if my pants are on I have my knife ;D
I was hunting with my Brother in law, was out further than I should've been in an unknown area by myself and a good storm blew in. I found myself deep in the snow with a lot more coming down and the wind was now blowing hard making it feel much colder than when I set out for the day.
I decided to hunker down and build a quick shelter to weather the storm, I had enough clothes on and I was really concerned about getting turned around and lost due to the storm. I found a good pine tree to nestle up under and reached for my non existent fixed blade-DOH! Wrestled my Insingo out of the layers of clothes and started push cutting through 1/2 pine boughs with ease, it cut like a laser beam, thank God. I used the lanyard to lengthen my grip and chopped up some hard wood branches to reinforce my roof, trimmed the pine, put it all together and made it through thanks to my most favorite knife, I was even pretty cozy thanks to my Small Insingo.
I made it back to camp late that night and had a Guinness, turned out to be just another day in the woods thanks to some sweet steel, I never leave home without my CRK edc and I never will! That knife may very well have saved my life after I made the mistake of not taking my fixed blade with me while out in unknown country and not checking the weather before leaving for camp. Now the smart phone can check the weather, the rest is up to me and I won't forget my lesson, or my Insingo.
 
The first time I took down my large plain jane sebenza. I loosened the pivot screw expecting the blade to get pushed over to the front scale by the force of the lock, because that is what had happened on every other framelock/liner lock I had taken down. Loosened the screw on my sebenza and nothing happened. Loosened some more, nothing happened. Completely removed the pivot screw. Nothing. I checked the blade. No blade play with the pivot screw completely removed! I was stunned. The rest of the takedown process was equally stunning. I had heard about tight tolerances, but when I actually tried to fit the pivot bushing back in the blade and almost couldn't because the fit was so precise, I finally really got it. That was the moment that I really understood what made CRK knives so different.
 
The first time I took down my large plain jane sebenza. I loosened the pivot screw expecting the blade to get pushed over to the front scale by the force of the lock, because that is what had happened on every other framelock/liner lock I had taken down. Loosened the screw on my sebenza and nothing happened. Loosened some more, nothing happened. Completely removed the pivot screw. Nothing. I checked the blade. No blade play with the pivot screw completely removed! I was stunned. The rest of the takedown process was equally stunning. I had heard about tight tolerances, but when I actually tried to fit the pivot bushing back in the blade and almost couldn't because the fit was so precise, I finally really got it. That was the moment that I really understood what made CRK knives so different.

When I did the same thing it really impressed me as well.

Another is when I had a 10 year old small sebenza that developed a slightly sticky lock. Left it with Ann at Blade, and it came back perfect. I've sent a couple of knives back to another well known company that came new with a sticky lock, and both times they just sent them back with a note saying they "met spec". CRK stands behind their product better than any IMO.
 
Back
Top