Moonglow Material

[JDieseljoe69]

Looking for suggestions on Moonglow, any good places to find it!!

If this is posted in the incorrect area, I apologize!!

Thanks
Joe

 

[Hengelo_77]

Do you mean glow in the dark?

It does wear down over the years, it glows less and less over time

 

[weo]

I think USA knifemaker has it, or http://masecraftsupply-com.3dcartstores.com/-Moon-Glow-Acrylic-18-x-5-x-12_p_2056.html

 

[JDieseljoe69]

I think USA knifemaker has it, or http://masecraftsupply-com.3dcartstores.com/-Moon-Glow-Acrylic-18-x-5-x-12_p_2056.html

I have used that stuff before, but it doesn't glow very bright.

 

[seanj]

yes USA Knifemaker also carries it.

https://usaknifemaker.com/acrylic-moon-glow-100-thickness.html

 

[Sam Dean]

There's an interesting mix of glowing scale material at Atlas Billiard Supply.

https://www.cuestik.com/store/?DEPARTMENT_ID=322

Type "glow" in the search box, bottom left in the category menu.

I have never used any of this material, or purchased anything from Atlas.

 

[JAGKNIFE]

Atlas billards and makers supply on Ebay

 

[skillgannon]

There's an interesting mix of glowing scale material at Atlas Billiard Supply.

https://www.cuestik.com/store/?DEPARTMENT_ID=322

Type "glow" in the search box, bottom left in the category menu.

I have never used any of this material, or purchased anything from Atlas.

I have ordered from there online store. I was happy with them. I was looking for low cost handle materials and they have some very inexpensive options. Not prime stuff but great for low cost blades or beginners. They also have a great selection of thicker micarta stock.

 

[jwill05]

I looked into this and was actually thinking of using this
https://www.glonation.com/glow-in-the-dark-products/neutral-glow-powders

 

[PSD]

I am also interested in finding some. I think it might be helpful to narrow down the real moonglow from the knockoff glow-in-the-dark acrylic sheet. I have a limited edition Spyderco Native Moonglow knife. This glows like crazy like no other material I have seen! I ordered some moonglow acrylic blanks off eBay (not sure of size, maybe 2" x 6"). When I compare the scale blanks to my knife there is no comparison. I would like to find the higher quality "real deal" material.

 

[E.Carlson]

Makermaterials supply has some glow stuff.
I think it's called carbon waves.
https://www.makermaterialsupply.com/search?page=2&q=Glow