ilknives
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 19, 2017
- Messages
- 388
One of my spacer-less tapers...
This bit of resin scale was the first I made, not perfect at all, but took long to make, taught me a lot and was pretty (to me at least!) so I made a pocketknife. When I say pocketknife I mean pocket knife.... these are the specs, look at the weight:
OAL 157mm 6.18 inch
Folded 91mm 3.58 inch
Weight 37g 1.3 ounce
Blade 2,3mm 0.09 inch RWL34 @ HRC 63-64, tested at 2 points along the blade
Titanium 6-4 liners with double detent (also UK future law safe - not quite fully OHO
)
BESS sharpness 135 and 156
Thanks for looking, comments and questions, Ignatius
(another earlier one: https://www.bladeforums.com/threads...sue-forged-blade.1592801/page-2#post-18201727)

This bit of resin scale was the first I made, not perfect at all, but took long to make, taught me a lot and was pretty (to me at least!) so I made a pocketknife. When I say pocketknife I mean pocket knife.... these are the specs, look at the weight:
OAL 157mm 6.18 inch
Folded 91mm 3.58 inch
Weight 37g 1.3 ounce
Blade 2,3mm 0.09 inch RWL34 @ HRC 63-64, tested at 2 points along the blade
Titanium 6-4 liners with double detent (also UK future law safe - not quite fully OHO

BESS sharpness 135 and 156

Thanks for looking, comments and questions, Ignatius
(another earlier one: https://www.bladeforums.com/threads...sue-forged-blade.1592801/page-2#post-18201727)



Last edited: