- Joined
- Apr 20, 2005
- Messages
- 776
MT23P [FONT=&]will be available for sale on [/FONT]Thursday, 15-Dec-2016 at 0900 [FONT=&](MST)[/FONT]
[FONT=&]All sales will be handled by the Spyderco Factory Outlet store online at [/FONT]http://spyderco.com[FONT=&]. You will find it under model # MT23.[/FONT]
Maximum Purchase Allowed:[FONT=&]2[/FONT]
Cost:[FONT=&] $69.95 each[/FONT]
Domestic Orders:
[FONT=&]Domestic Shipping in the Continental United States: Standard Shipping rates apply.[/FONT]
[FONT=&]Alaska, Hawaii, and Puerto Rico Shipping: USPS $15.00[/FONT]
International Orders:
[FONT=&]International orders have a maximum allowed amount of $600 (including shipping fees) for all online orders. All orders over $600 must be placed via phone or e-mail and paid for via wire transfer. Shipment of orders paid for via wire transfer will not occur until monies have been received by the Spyderco Factory Outlet Store. You may contact our store to place a wire transfer order at [/FONT]sfo@spyderco.com[FONT=&] or 303/279-8383 x 107.[/FONT]
[FONT=&]International shipments will be sent out according to our International Shipping Schedule:[/FONT]
[FONT=&]Shopping Cart Total: $0-$99 - Shipping/Handling Charge $25[/FONT]
[FONT=&]Shopping Cart Total: $100-$399 - Shipping/Handling Charge $45[/FONT]
[FONT=&]Shopping Cart Total: $400 and higher - Shipping/Handling Charge $60[/FONT]
[FONT=&]International shipments will be via USPS International Priority Mail. Please be aware, we will have limited tracking capabilities. Tracking once it leaves the US is dependent upon the postal services outside the US and their ability to provide it. However, this will completely eliminate UPS Brokerage Fees.[/FONT]
About CPM 20CV:
[FONT=&]Spydercos twenty-third Mule Team installment features CPM 20CV steel, a highly wear resistant, powder metallurgy stainless tool steel. CPM 20CV is unique in that it contains a high volume of vanadium carbides and the highest amount of chromium of any high-vanadium stainless steel currently available. This potent combination of elements gives it a remarkable combination of high wear resistance, superior corrosion resistance, good impact toughness, and excellent polishability. These properties are maximized by the powder metallurgy process, which ensures an extremely clean steel with small carbides and a very fine grain size.[/FONT]
[FONT=&]CPM 20CV excels in industrial applications that demand high wear resistance and high corrosion resistance, such as plastic injection feed screws, barrel liners, screw tips, and mold cavities. It is also used in food processing equipment and pelletizer knives and is an extremely popular blade steel in high-performance custom knives.[/FONT]
[FONT=&]CPM 20CV's alloy composition is as follows: Carbon: 1.90%, Manganese: 0.30%, Silicon: 0.30%, Chromium: 20.0%, Tungsten: 0.60%, Molybdenum: 1.00%, and Vanadium: 4.00%.[/FONT]
[FONT=&]An advanced alloy that offers outstanding potential in high-performance cutlery applications, CPM 20CV is a truly unique blade material.[/FONT]
What is the Mule Team:
[FONT=&]For those of you unfamiliar with our Mule Team Project, it is unique to Spyderco. In-house we call knife samples designed and built for testing and evaluation Mules. We know a healthy percentage of knife users are interested in different blade steels and their performance abilities. Running with that, we released an ongoing Mule Team Project. Several times per year we unveil the same single-piece fixed blade patterned knife in a different and exotic blade steel. This lets steel-obsessed knife knuts test, try and use something normally not offered to the industry. Product runs are limited to 600 1000 pieces of each steel type depending on foundry requirements.[/FONT]
[FONT=&]Mule Blades are leaf-shaped with a sharpened and finished PlainEdge blade but with an unfinished handle providing a do-it-yourself opportunity. The unfinished handle has a series of holes for attaching custom handle scales or for wrapping with para-cord. Each piece is sold without handle scales or a carry sheath focusing the project on the blade steel. This opens endless creative possibilities for the owner to design their own handle scale and carry options.[/FONT]
[FONT=&]All sales will be handled by the Spyderco Factory Outlet store online at [/FONT]http://spyderco.com[FONT=&]. You will find it under model # MT23.[/FONT]
Maximum Purchase Allowed:[FONT=&]2[/FONT]
Cost:[FONT=&] $69.95 each[/FONT]
Domestic Orders:
[FONT=&]Domestic Shipping in the Continental United States: Standard Shipping rates apply.[/FONT]
[FONT=&]Alaska, Hawaii, and Puerto Rico Shipping: USPS $15.00[/FONT]
International Orders:
[FONT=&]International orders have a maximum allowed amount of $600 (including shipping fees) for all online orders. All orders over $600 must be placed via phone or e-mail and paid for via wire transfer. Shipment of orders paid for via wire transfer will not occur until monies have been received by the Spyderco Factory Outlet Store. You may contact our store to place a wire transfer order at [/FONT]sfo@spyderco.com[FONT=&] or 303/279-8383 x 107.[/FONT]
[FONT=&]International shipments will be sent out according to our International Shipping Schedule:[/FONT]
[FONT=&]Shopping Cart Total: $0-$99 - Shipping/Handling Charge $25[/FONT]
[FONT=&]Shopping Cart Total: $100-$399 - Shipping/Handling Charge $45[/FONT]
[FONT=&]Shopping Cart Total: $400 and higher - Shipping/Handling Charge $60[/FONT]
[FONT=&]International shipments will be via USPS International Priority Mail. Please be aware, we will have limited tracking capabilities. Tracking once it leaves the US is dependent upon the postal services outside the US and their ability to provide it. However, this will completely eliminate UPS Brokerage Fees.[/FONT]
About CPM 20CV:
[FONT=&]Spydercos twenty-third Mule Team installment features CPM 20CV steel, a highly wear resistant, powder metallurgy stainless tool steel. CPM 20CV is unique in that it contains a high volume of vanadium carbides and the highest amount of chromium of any high-vanadium stainless steel currently available. This potent combination of elements gives it a remarkable combination of high wear resistance, superior corrosion resistance, good impact toughness, and excellent polishability. These properties are maximized by the powder metallurgy process, which ensures an extremely clean steel with small carbides and a very fine grain size.[/FONT]
[FONT=&]CPM 20CV excels in industrial applications that demand high wear resistance and high corrosion resistance, such as plastic injection feed screws, barrel liners, screw tips, and mold cavities. It is also used in food processing equipment and pelletizer knives and is an extremely popular blade steel in high-performance custom knives.[/FONT]
[FONT=&]CPM 20CV's alloy composition is as follows: Carbon: 1.90%, Manganese: 0.30%, Silicon: 0.30%, Chromium: 20.0%, Tungsten: 0.60%, Molybdenum: 1.00%, and Vanadium: 4.00%.[/FONT]
[FONT=&]An advanced alloy that offers outstanding potential in high-performance cutlery applications, CPM 20CV is a truly unique blade material.[/FONT]
What is the Mule Team:
[FONT=&]For those of you unfamiliar with our Mule Team Project, it is unique to Spyderco. In-house we call knife samples designed and built for testing and evaluation Mules. We know a healthy percentage of knife users are interested in different blade steels and their performance abilities. Running with that, we released an ongoing Mule Team Project. Several times per year we unveil the same single-piece fixed blade patterned knife in a different and exotic blade steel. This lets steel-obsessed knife knuts test, try and use something normally not offered to the industry. Product runs are limited to 600 1000 pieces of each steel type depending on foundry requirements.[/FONT]
[FONT=&]Mule Blades are leaf-shaped with a sharpened and finished PlainEdge blade but with an unfinished handle providing a do-it-yourself opportunity. The unfinished handle has a series of holes for attaching custom handle scales or for wrapping with para-cord. Each piece is sold without handle scales or a carry sheath focusing the project on the blade steel. This opens endless creative possibilities for the owner to design their own handle scale and carry options.[/FONT]
