My (pretty much) daily carry

Joined
Jul 20, 2014
Messages
2,700
First I must apologize. I rarely stray from the traditional forum. Second, this got lengthy fast!
Having said that, whenever I make my way over here I just love reading about(and looking at) one of the greatest knives of all time. The Buck 110 of course!
I figured I would share my 110 that is on my hip just about everyday. It has knocked some of the most highly regarded modern folders out of my rotation. My Sebenza and PM2 for example were my go to knives whenever I needed(or just wanted) to carry a locking folder, and they are great knives no doubt. But there is just something about a well used 110 that has "soul" for lack of better words.
It all started with a Walmart 110 about 4 years ago. I carried that knife everywhere. I learned to sharpen on it. It was my first quality knife. It gave me a sense of pride. I couldn't wait to pull it out and use it on the job site just to hear my dad say "boy, that knife is sharp!" That knife has sense been relocated to the truck.
YGI0Xz8.jpg

Of course I quickly moved towards modern folders when I found this site, and before I knew it the 110 was just a distant memory. But fast forward a rear or two I made my way over to the traditional forum where I quickly lost interest in the lates and greatest. I started looking at slip joints and eventually I was back staring at the 110. About that time the Copper and Clad 110 was just coming out in 5160. I had to have it! I'm just a sucker for carbon steel. I can't help it!
So that brings me to my daily carry knife. Sure it has imperfections. Yes, I had to repeen the pivot pin a little to remove some blade play, but over the last year and a half this knife (and its sheath)has gathered so much character. It is truly mine! I love each and every blemish on the oak slabs and brass bolsters. I'll admit that I've used it for light hammering, as a wedge under a pry bar to get a little extra leverage, and put it in other possible abuse situations but nothing to crazy. I promise. I might carry something a bit more modern when fishing to avoid excessive rust, but for the most part this knife is the knife I grab when I need something sturdy.
I give you MY 110:
yPypAEv.jpg


I didn't plan to make such a wordy post, but once I started typing I couldn't stop. There's just so much I could say about this glorious knife!
 
Absolutely perfect , i'm a sucker for a well loved/used knife i see nothing but character here . Is that passion i'm detecting ? lol
 
Yes, love the patina and you certainly have a nice edge on that 110. What differences do you notice between the 5160 and the 420HC steels? Preston
 
First off SSS,

Let me welcome you and all your words the Buck forum!

Fantastic thread you have started here, I also like the looks of years (not rears) of use put on an old 110. Buck can remove years of use off an old 110 and make it look NIB, I just can't bring myself to change the looks of one of my work horse's (not to mention a collectable old 110 as well). I went many years without using a 110 and went through many of the new era knives and loved most of them. I took a big heavy 110 into the field to put one of the new steels to the test and discovered how well the design of this traditional hunting knife worked for it's intended purpose. The year was 2005 and that knife and super steel combo have been one of my favorite go too EDC knives forever more.

Thank you for sharing your knife and your passion for a great cutting tool:thumbup:. Just a thought and to plant a seed, you can pick up a 110 with a coated S30V blade for use when fishing as this combo has fantastic corrosion resistance;) even in salt water.

JB
 
Last edited:
Yes, love the patina and you certainly have a nice edge on that 110. What differences do you notice between the 5160 and the 420HC steels? Preston

You know, honestly it's been so long since I've used the old 110 that I don't remember any differences, and even if I did I have never been one to notice steel changes all that much. I will say that the 5160 loses its razor sharp edge fairly quickly. But on the plus side it is incredibly easy to bring back. For example I was laying and trimming some plastic(vapor barrier) in a crawl space at work the other day. This is one of the quickest ways I'll dull a knife because of all the dirt that comes into contact with the edge. This morning I spent a few minutes on a strop, and the edge is back to effortlessly shaving arm hair.

JB, I understand. I am tempted to send in this latest 110 to have them fix some serious blade play in the closed position, but I just fear them having to refinish the bolsters and handles when they are done. I've just come to accept the rattle when the blades closed. It's nice and tight when open, and that's all that really matters to me.
And as far as a fishing 110 goes, I need to just get a new sheath for my 102 so I can use that one again. It was put up wet and after one to many salt water dips the metal snap rusted out.
Now I just need to decide on a stock sheath or a fancy aftermarket sheath. Decisions decisions...
 
You know SSS there are more than a few folks here on the forums who make fantastic sheaths. Do a quick search and have one made to your spec's!

JB
 
SSS, great post. I share your enthusiasm for the Oak 5160 110. Don't they look great and feel like they can handle the real tough jobs! I carry this one more than my other 110s.

Here are some before and after patina pics.

Buck5160%2B110_zpsdb9vk5mi.jpg


Buck%2B110%2B5160_zps11aepk2w.jpeg


Buck--110-5160_zpsvglqh9hb.jpg


Buck110-5160_zpsdkayojad.jpeg
 
Last edited:
Back
Top