Jason B.
Knifemaker / Craftsman / Service Provider
- Joined
- Jun 13, 2007
- Messages
- 11,196
Hi, my name is Jason and I have been hand sharpening for around 18 years. As some of you have seen in my sig line I offer a sharpening service to bladeforums members, its not a business and I don't have a web site its just something I offer to all the good people of BF. I never thought much of my sharpening ability but when I joined BF I learned I had more than just the average sharpening skill. I have gained much general knowledge from this forum and also great gains in my sharpening knowledge that have pushed me to a point that I never thought was possible. In return I would like to give back, for those that don't yet have the ability and for those that would just like to see what a extremely sharp high polished knife is like, I offer you my service.
Here is some basic info
A standard sharpening (except recurves) is done with a DMT aligner and DMT benchstones, the edge is finished on the XX-fine diamond stone then given a very light strop to remove any remaining burr. (blade length limited by aligner tool)
Hand sharpening is also done on the DMT stones but the edge is finished on a loaded strop for a higher polished finish. Their are 3 options for final finish 1, 0.5, and 0.25 micron,
Re-curves and convex edges are a special breed and could be sharpened in several different ways.
From this time on the first sharpening is always free and return customers will also receive reduced pricing on previously sharpened blades. All plain edges guaranteed hair whittling sharp.
Customer responsible for all shipping charges.
This is kinda my rough draft so I'm open to suggestion, questions, and changes. Please let me know what ya all think or if their is anything else you would like to know about me.
Thanks,
Jason
Here is some basic info
A standard sharpening (except recurves) is done with a DMT aligner and DMT benchstones, the edge is finished on the XX-fine diamond stone then given a very light strop to remove any remaining burr. (blade length limited by aligner tool)
Hand sharpening is also done on the DMT stones but the edge is finished on a loaded strop for a higher polished finish. Their are 3 options for final finish 1, 0.5, and 0.25 micron,
Re-curves and convex edges are a special breed and could be sharpened in several different ways.
From this time on the first sharpening is always free and return customers will also receive reduced pricing on previously sharpened blades. All plain edges guaranteed hair whittling sharp.
Customer responsible for all shipping charges.
This is kinda my rough draft so I'm open to suggestion, questions, and changes. Please let me know what ya all think or if their is anything else you would like to know about me.
Thanks,
Jason
Last edited: