New Gransfors Bruks Wildlife Hatchet issue?

C

Crossblade

Joined
May 15, 2012
Messages
7
Hi all,
Not sure if this is really an issue, though am a little concerned with the recent Gransfors Bruks wildlife hatchet I received through an online seller. It has what appears to be the makings of a knot under the axe-head, and are worried this may cause some sort of weakness in the handle/axe?
I have also noticed there is excessive grind towards the bottom of the blade, and a flat spot right on the point/edge. Is this normal for these axes, it may sharpen out over time so I guess is not the biggest of issues.

bruks.jpg
 
Given that I can't see any of what you're talking about, I'm gonna' say it's a non-issue. :p
 
FortyTwoBlades said:
Given that I can't see any of what you're talking about, I'm gonna' say it's a non-issue. :p
Click to expand...
Yep your seeing the same thing i'm seeing, looks great from here.:D I've got the same hatchet made by the same guy MM. sweet hatchet for sure.
 
Crossblade, I can see what concerns you but that is not a knot in the wood - it is the effect of the convex curve of the haft showing different depth sections through a grain that runs true from bit to poll (the way it is meant to). Look also at contoured micarta handles that have that same pattern. But if you don't want it, can I have it :D
 
could go out and find a downed tree and start chopping wrist thick branches for firewood and see what fall off first. part of the hatchet or your arm. looks like it will do the job.
 
Crossblade said:
I have also noticed there is excessive grind towards the bottom of the blade, and a flat spot right on the point/edge. Is this normal for these axes, it may sharpen out over time so I guess is not the biggest of issues.
Click to expand...
It's my understanding that each axe head is tested for the wright hardness/heat treatment. They use a hammer to strike the toe and the heel of the bit.
http://www.gransfors.com/htm_eng/yxboken/bok24.htm
If the edge doesn't chip, it's good to go. It leaves a flat spot though.
 
I don't see any issues. I have the exact same hatchet (even made by the same smith), the grain (as shown) is not going to be a problem in any way. Mine looks the same and has worked flawlessly after many miles/years/logs.

Mark
 
You must log in or register to reply here.
Back
Top