Odd question about G-flex on nylon fabric

oldschool45

Gold Member
Joined
Oct 15, 2007
Messages
1,211
I'm asking this here bacause my Google Fu sucks or no one else has asked the question and people here have a bit of experience with West Systems G-flex.
I've recently gotten back into scuba diving and purchased a used BCD. There are a few repairs and adjustments I want to make (none of them on the bladder). Most of the material is nylon fabric of some type.
How well will G flex work? I ask because I have it availabe from my knife making and some of the spots I can't stich.
Thanks,
 
G-Flex is not viscous enough to work well on fabric. I believe you “might” be better off with West System 207 Special Clear Hardener used in conjunction with the basic epoxy resin 105. The 207 is their cloth/fabric resin. You might need to add a piece of cloth over the repair area - not just add epoxy to the surface but create a patch.

NOW - I HAVE NO IDEA - if this is good advice. :rolleyes: I am only pretty darn sure that G-Flex is not the product you want. Others might have suggestions for a better fabric patch.
 
JB Weld Plastic Bonder is a good choice.

There are also black resins made for scuba gear repair. They work well on neoprene and nylon. Aquaseal is the one I have used.
 
On something like you describe, I don't think epoxy would be a first choice at all. E6000 is a rubbery glue that bonds with just about everything. I've used it to patch my tractor seat and it's going on a couple years now and still holding. It's in the glue section of most big box stores.
 
On something like you describe, I don't think epoxy would be a first choice at all. E6000 is a rubbery glue that bonds with just about everything. I've used it to patch my tractor seat and it's going on a couple years now and still holding. It's in the glue section of most big box stores.
E6000 is great stuff, I've found Shoe-Goo to be basically the same product and it comes in clear, black and white.
 
I don't know why I didn't think of E6000 and Shoe Goo. Both are excellent for flexible repairs and very waterproof. I even used E6000 for some jewelry repairs. The E8000 is quite a bit harder and not nearly as flexible I didn't like it.
 
I put Shoe Goo on the inside sole of some old hunting boots 15 or so years ago. I wear them still and the goo has held up.
 
Back
Top