OE...The cardboard ZT0200 arrived today...

glockman99

glockman99

RIP Dann, you were a good guy.
Joined
Jun 12, 2000
Messages
21,269
Oregon Edge...The cardboard ZT 0200 that you sent to me arrived today. :thumbup:.:thumbup:. Thank-you!. However, unlike the other two ZT 0200 that I own, this one was pretty dull. I tried to sharpen it using my Spyderco Sharpmaker, but it wouldn't put the razor-sharp edge on it that I like (so the Sharpmaker is now for trade up on the "Gadgets & Gear" trade forum.). After a little work with a file and a hammer, it now has a pretty good edge.

Also, you must have forgot that I'm a "lefty", because I had to poke a couple extra holes in the scale so I could move the pocket (paper)-clip for tip-up, left-side carry. BTW...The pocket (paper)-clip itself doubled as a handy tool for that job, as it didn't require a Torx-driver...Nice touch!.:thumbup:.:thumbup:.
 
i'm so glad that i wasnt eating like i normally am when reading something that turns out to be funny. this time i didnt end up with food all over my keyboard or monitor. :D :thumbup:good one dann. (dann, you can send the knife to me. i have cardboard sharpening wheels:p)
 
I guess I have to get a working digital camera. I tried drawing a picture of the cardboard ZT 0200 onto my computer screen for you guys to see, but it didn't turn out too well.:p.
 
How did you change the clip? I bought a Needs work today and really love, but hate the tip down. I'd love to change it but don't really want to stumble around without a plan. Thanks, Clint
 
clintg said:
How did you change the clip? I bought a Needs work today and really love, but hate the tip down. I'd love to change it but don't really want to stumble around without a plan. Thanks, Clint
Click to expand...

well first, find a box..........hehehehe
 
glockman99 said:
I guess I have to get a working digital camera. I tried drawing a picture of the cardboard ZT 0200 onto my computer screen for you guys to see, but it didn't turn out too well.:p.
Click to expand...


Do you have a scanner? I would love to see this beauty!! :D:D

Nice one OE. :D :thumbup:
 
My mom was right about eating lead paint! I should have left it alone, but it tastes sooo good.:)
 
Glockman,
I have a digital camera you can have if you would like. The battery is just shot so you would need to keep it plugged in to use. New batts cost 40$ last time I checked but it works fine plugged in. I just never really use it as I can borrow another camera most times. This way next time you cut yourself you can take a picture for us ;)

Anyways, PM me through the forum with your address and I will get it out to you. Of course this is only if you would like it in the first place.
 
I'll chip in $ 20 towards a new battery for him if anyone else will match it!

What are the battery specs?
 
This is the camera
Macro mode
dsc00005zz5.jpg


It is sony cybershot 3.2MP dsc p5 w/ 64mb card. I wish I bought sony stuff (hate the company so don't buy them) so I had extra memory cards for this but I have the only one that came with this camera.
p5frontblkpb7.jpg

http://www.steves-digicams.com/2001_reviews/p5.html

Its not really small but still smaller than most I have seen from the time it came out.

Just for a little backstory. I live life based on one principle. Leave it better than you found it. So part of that includes paying it forward and due to that I have met some really cool people. The camera was actually given to me by one of those cool people, a friend who knew I could use it and I had helped out a lot of times. Glockman, if you ever don't need it please pass it on to the next person.

It actually looks like the batteries are a good bit cheaper a year after I last checked them. 20$ from some sites with lots of customer ratings. You might find it from a more reputable site for same price by looking around. The battery will hold a charge for about 10 minutes I think but it is pretty used and won't hold charge for too long
http://www.google.com/products?hl=en&safe=off&q=Cyber-shot+DSC-P5+battery&scoring=mrd
 
shhhh....don't keep bumping it to the top :D

I think if glockman does want it then we should get him to post a picture of himself with something funny like a shoe or lampshade or waffle on his head. Just saying.

Is offset good guy too?
 
glockman99 said:
Oregon Edge...The cardboard ZT 0200 that you sent to me arrived today. :thumbup:.:thumbup:. Thank-you!. However, unlike the other two ZT 0200 that I own, this one was pretty dull. I tried to sharpen it using my Spyderco Sharpmaker, but it wouldn't put the razor-sharp edge on it that I like (so the Sharpmaker is now for trade up on the "Gadgets & Gear" trade forum.). After a little work with a file and a hammer, it now has a pretty good edge.

Also, you must have forgot that I'm a "lefty", because I had to poke a couple extra holes in the scale so I could move the pocket (paper)-clip for tip-up, left-side carry. BTW...The pocket (paper)-clip itself doubled as a handy tool for that job, as it didn't require a Torx-driver...Nice touch!.:thumbup:.:thumbup:.
Click to expand...


Actually it was me rebeltf that sent you that badboy of a knife. :D

Handles were hand crafted from AES40 cardboard, the blade from 10W40 cardboard , a slightly softer cardboard for ease of sharpening out in the field.
Backsapcer , lovlingly hefted from scrap AES40 for added stability when sturdiness counts !

Genuine nut and bolt from an old cash register for the pivot and a hand crafted paper clip for the pocket clip.

I got quite a few chuckles around the office after making that and showing your post :D, best of all it was sent on the Boss's dime ! :D

Hold onto it ! someday it may be worth mucho dinero. :D
 
blendingnoise said:
Glockman,
I have a digital camera you can have if you would like. The battery is just shot so you would need to keep it plugged in to use. New batts cost 40$ last time I checked but it works fine plugged in. I just never really use it as I can borrow another camera most times. This way next time you cut yourself you can take a picture for us ;)

Anyways, PM me through the forum with your address and I will get it out to you. Of course this is only if you would like it in the first place.
Click to expand...
I'm not one of those who is paranoid about posting my addy on the 'Net, so here it is:

Dann Fassnacht
708 North L Street Apt. 2
Aberdeen, WA 98520
 
Thanks cutter...

Dann, PM me and cutter with your paypal addy, or where to send the checks! $ 40 for a new battery is on it's way!
 
You must log in or register to reply here.
Back
Top