Paramilitary 2 Disassembled

[Forrest G]

For anyone who is curious, this is what the Paramilitary 2 looks like completely disassembled. I hope this can help someone in the future! I also can't stress enough that you need to use quality Torx drivers when you disassemble knives, I recommend ACE Hardware's 6pc. precision set.

 

[EyeDog]

I've done mine twice with no problems except the lanyard fitting. What's your secret to getting it off?

 

[Forrest G]

I've done mine twice with no problems except the lanyard fitting. What's your secret to getting it off?

Take the two handles with one in each hand and just wiggle it back and fourth, usually one side will pop off and then your left with the one side still connected to the lanyard tube. The best way I found to get off the other side is to push a pen or pencil through the lanyard hole just to get it out a little bit, then wedge something GENTLY all around the tube tell it pops off (I use the STR Ti Pry Bar, works like a charm)

 

[EyeDog]

Thanks Forrest...I'll try that next time.