Pocket Sheath?

Joined
Feb 14, 2016
Messages
1,692
Does anyone carry a large in the pocket sheath? Any pics? How much of the knife does it cover? Anybody used it for polished/UGs and how well does it protect the knife?

Any advice is appreciated!
 
I carry in a pocket sheath every day. Two reasons, I don't have to worry about losing the knife and it keeps unwanted snail trails away. The pocket sheath will protect a UG or CCG from any thingies that might scratch it.

frFUgLG.jpg
 
I carry in a pocket sheath every day. Two reasons, I don't have to worry about losing the knife and it keeps unwanted snail trails away. The pocket sheath will protect a UG or CCG from any thingies that might scratch it.

frFUgLG.jpg
Is that a CRK sheath?
 
I also have the CRK sheath. I took off the pocket clip and got the spacer that fits in the slot.
It's flat and comfortable and my large Inkoski has held up well in my back pocket ..
I take it out of the sheath a couple times a day and the scales look good..
 
How does anodization hold up going in and out of the sheath constantly?

The plains that are blasted start to show wear on the outer edges of the slabs, which I like. I haven't seen any wear on a CCG or UG, maybe because the slabs are polished. As far as the anodization, the sheath hasn't affected it at all, except for the thumb lugs which I think comes from use more than a sheath
 
Yea I do, not so much for protection to the scales but because of the open back protection from the crap in my pocket comin' in contact with sharpened blade's edge. Als for convenience, makes it easier to find and when I pull on the lanyard/fob, friction makes the sheath stay in the pocket and the knife come right out. The only exception is the one with the toggle and flap and that one protects very well.

These are all homemade, except the one that came with the large ebony inlay 21.

CYGOrxZ.jpg
DaaYGYu.jpg
vugn65i.jpg
8A4xlgb.jpg
Y6DxlIX.jpg
HZROICT.jpg
vyOtjBl.jpg
K4buPcO.jpg
 
Back
Top