- Joined
- May 18, 1999
- Messages
- 15,395
Shirley, my sweet wife Barbie finally retrieved my keys for me so I could get to my Balance Models.
Here's the spec's.
# 1- Is a village model and not made by H.I. but sold by them with same guarantee. It doesn't have the H.I. stamp on it.
Weight = 11 ounces.
OAL = 13 inches.
Blade length = 8 5/8 inches.
Blade thickness = 3/8 inch.
Width of blade at belly = 1 7/16 inches.
Width of blade at thinnest = 13/16 inch.
# 2- Is a H.I. model with the H.I. stamp although no kami mark. IIRC it was made by Kumar.
Weight = 13 ounces.
OAL = 13 1/16 inches.
Blade length = 8 5/8 inches.
Blade thickness = 3/8 inch.
Thickness of blade at belly = 1 9/16 inches.
Width of blade at thinnest = 13/16 inch.
Both blades have a nice gentle fuller on each side that help to lighten the blade.
I carried mine in the front pocket of my jeans when I used to walk in our local wildlife parks.
I had special permission to gather certain plants from my friends who worked there.
These little knives make an excellent little draw knives with the recurve next to the bolster.
I used mine to cut small ash saplings up to 1 1/2 inches, limb them and strip the bark.
The heavy convex edges on mine don't make these very good whittleing knives for intricate carving, but the models coming out now are almost always thinner edged so if you get one YMMV.
(Your Mileage May Vary.)
If you're interested in my opinion I think these are great little knives that are excellent for lighter work and I think you would find one very satisfactory from what you've said your requirments are.
The first khuk that Bill sent me was a 15" AK and I had already decided on an 18" AK for my personal use.
I gave the 15" AK to my sweet wife Barbie and she absolutely loves it.
But my Barbie is a little bit larger than you are.
Barb has also used bigger khuks, 18" models, for heavier chopping and did just fine with them.
Hope this helps.
Here's the spec's.
# 1- Is a village model and not made by H.I. but sold by them with same guarantee. It doesn't have the H.I. stamp on it.
Weight = 11 ounces.
OAL = 13 inches.
Blade length = 8 5/8 inches.
Blade thickness = 3/8 inch.
Width of blade at belly = 1 7/16 inches.
Width of blade at thinnest = 13/16 inch.
# 2- Is a H.I. model with the H.I. stamp although no kami mark. IIRC it was made by Kumar.
Weight = 13 ounces.
OAL = 13 1/16 inches.
Blade length = 8 5/8 inches.
Blade thickness = 3/8 inch.
Thickness of blade at belly = 1 9/16 inches.
Width of blade at thinnest = 13/16 inch.
Both blades have a nice gentle fuller on each side that help to lighten the blade.
I carried mine in the front pocket of my jeans when I used to walk in our local wildlife parks.
I had special permission to gather certain plants from my friends who worked there.
These little knives make an excellent little draw knives with the recurve next to the bolster.
I used mine to cut small ash saplings up to 1 1/2 inches, limb them and strip the bark.
The heavy convex edges on mine don't make these very good whittleing knives for intricate carving, but the models coming out now are almost always thinner edged so if you get one YMMV.
(Your Mileage May Vary.)
If you're interested in my opinion I think these are great little knives that are excellent for lighter work and I think you would find one very satisfactory from what you've said your requirments are.
The first khuk that Bill sent me was a 15" AK and I had already decided on an 18" AK for my personal use.
I gave the 15" AK to my sweet wife Barbie and she absolutely loves it.
But my Barbie is a little bit larger than you are.
Barb has also used bigger khuks, 18" models, for heavier chopping and did just fine with them.
Hope this helps.