Question for Steve or anyone else

troutfisher13111 said:
Do you happen to know the thread size and length of the paramilitary 2 pocket clip screws?
Click to expand...

Button head (black) 2-56 x 1/4" lengths with Torx (t-6) size for the driver or you can maybe find some T8 if lucky. Either works. These are what they would be to reorder just look for 1/4" button head torx in 2-56 screws. Spyderco has been known for some proprietary parts so it is possible just as it is with Kershaw to see slight variance from store bought vs factory. However, worse case scenario will be if you carry tip down the length will let you know it is too long when it interferes with the blade pivot action. In that case a bit needs to be taken off the end. A gloved hand and sturdy thumb and a 3/32nd screw hole through a sheet of steel or brass, pop in the screw through the hole, hold the head with the thumb and a quick zip with a belt should shorten that just enough but don't go too far if you have to take it down a half mm or so. Just don't take off so much that it won't grab the threads.

I get all my screws from Aarons screws via google.

STR
 
You must log in or register to reply here.
Back
Top